Rck60b-22bx tension pulley

[dvto2]

The bearings seized on the tensioner pulley of my mower deck. Does it look like I need to replace the arm as well as the pulley?

 

[North Idaho Wolfman]

Based on what I can see looks like the bearing has welded itself to the arm, so yea replace it.

https://www.messicks.com/parts/kubota/k5371-34730?term=&utm_source=google&utm_medium=paid&gad_source=1&gad_campaignid=20359475644&gbraid=0AAAAAD-1gA9T3wnFBeihFzi-dCw0b75lG&gclid=Cj0KCQjwz9_QBhD_ARIsADnSCfCX3LMtlkVYaT6DykrCiKik0CdA6Yd9F6FNTODBr6Pq3j3arOE7GJgaAvi7EALw_wcB

 

[dvto2]

Based on what I can see looks like the bearing has welded itself to the arm, so yea replace it.

https://www.messicks.com/parts/kubota/k5371-34730?term=&utm_source=google&utm_medium=paid&gad_source=1&gad_campaignid=20359475644&gbraid=0AAAAAD-1gA9T3wnFBeihFzi-dCw0b75lG&gclid=Cj0KCQjwz9_QBhD_ARIsADnSCfCX3LMtlkVYaT6DykrCiKik0CdA6Yd9F6FNTODBr6Pq3j3arOE7GJgaAvi7EALw_wcB

I think you’re right. I couldn’t budge it with some vice grips. Thanks. I ordered all the parts from my local dealer.

 

[dvto2]

I got my new tensioner arm and got the pulley on but then I realized I assumed the bushings in the end of the arm without the pulley would be installed. They are not. I tried to drive out the old bushings with a pinch and hammer and they did not seem to budge. I’m going to take both to the dealer tomorrow morning but any guidance for getting these bushings out would be appreciated.