Rkc54 mower deck

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
7,507
2,841
113
Austin, Texas
Looks like a deflector from a snow blower (says a guy from Texas that has only seen pictures of snow blowers).
 

Caden

Member

Equipment
1979 B7100
Apr 16, 2026
63
28
18
Virginia
My guess it that it came from under the tractor rather than the on deck.

Such as a mid pto guard, hydrostatic fan guard, etc.

A picture of your deck or under the tractor would be helpful.
 

JimDeL

Well-known member
Lifetime Member

Equipment
BX2380; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
Aug 31, 2022
453
528
93
NE Ohio
It's part of the deck adapter kit. It bolts in under the deck, just forward of the discharge chute. It helps direct the flow of cuttings into the collector. If you're not using the vacuum/collector you don't need it.

Actually, even when I'm using my lawn/leaf vac I don't install it. The system works fine without it.
 
  • Like
Reactions: 1 user

ChickenLady

New member

Equipment
Bx23s
Sep 19, 2024
4
1
1
New Hampshire
It's part of the deck adapter kit. It bolts in under the deck, just forward of the discharge chute. It helps direct the flow of cuttings into the collector. If you're not using the vacuum/collector you don't need it.

Actually, even when I'm using my lawn/leaf vac I don't install it. The system works fine without it.
That must be it! I have no clue why it was installed when I didn't have a lawn/leaf vac or collector of any sort. I ended up taking it off and ran it fine without it. Thanks so much! I'm still learning so much about this stuff.
 

ChickenLady

New member

Equipment
Bx23s
Sep 19, 2024
4
1
1
New Hampshire
My guess it that it came from under the tractor rather than the on deck.

Such as a mid pto guard, hydrostatic fan guard, etc.

A picture of your deck or under the tractor would be helpful.
Yeah, I thought I took a photo before I took it off, but had already flipped it over after removing it and didn't want to lift it again. It was stupid of me not to.
 
  • Like
Reactions: 1 user