White 2-105 head torque specs and oil leak.

[Shadow_storm56]

We fixed up this old tractor, it's gone really well we put a new head gasket on fixing the oil to coolant leak. Year later noticing oil from the exhaust side of the turbo, figured maybe a bad new turbo so took it off... turbo is fine and dry. Down in the exhaust manifold there is oil.....

So I'm hoping to get away with re-torqing the head bolts. It was a really gummed up engine so maybe it didn't torque down quite right. Anyone have the torque specs? It's a T6 354.4 engine.

Otherwise the engine runs perfectly

 

[BAP]

Did you try googling it?

 

[TheOldHokie]

Try asking that question here:

https://forums.yesterdaystractors.com/forums/white.346/

Dan

 

[Shadow_storm56]

Did you try googling it?

Google had 95 to 135 foot pounds. So I worked my way up it looks like they had done 130 pounds. I got probably 2/3 of a turn on some of the head bolts on the leaking end so that's a good sign. Opposite end was all tight

 

[Shadow_storm56]

Try asking that question here:

https://forums.yesterdaystractors.com/forums/white.346/

Dan

I figured it out by Google plus seeing what torque they were at on the tighter ones but this is a great resource thanks!