B6200 engine in a b7100

[Garrettl1515]

Have the chance to buy a b7100 very nice with loader but no engine. Also can buy a b6200 with running engine but 2nd no loader. Will the motor in the b6200 a (850) fit in the 7100 (750) any advice helps

 

[Garrettl1515]

Some pics

 

[North Idaho Wolfman]

Yes, the external block size is the same and mounts are all the same along with flywheel mount.
You just might run into a slight twist.
1/2 of the b6200's were a thermosiphon system, and the other 1/2 were a water pump and thermostat system.
Both will work but if you have a choice you want the Water pump version.
I can tell you how to alter the radiator very easily to fit the water pump or you might be able to use the B6200 radiator.

 

[Garrettl1515]

Yes, the external block size is the same and mounts are all the same along with flywheel mount.
You just might run into a slight twist.
1/2 of the b6200's were a thermosiphon system, and the other 1/2 were a water pump and thermostat system.
Both will work but if you have a choice you want the Water pump version.
I can tell you how to alter the radiator very easily to fit the water pump or you might be able to use the B6200 radiator.

Thanks for the fast reply I’ll keep you updated, would the loader from the 7100 fit a b200

 

[Garrettl1515]

Thanks for the fast reply I’ll keep you updated, would the loader from the 7100 fit a 6200

6200*

 

[North Idaho Wolfman]

Thanks for the fast reply I’ll keep you updated, would the loader from the 7100 fit a b200

That would depend on the loader, some did cross over.

Looks like the B7100 is a 4wd where the b6200 is a 2wd.
4wd's make much better loader tractors.