Recent content by yorkies77

Working in brush like you are you need to get a skid plate from Bxexpanded. they are 189.00 and worth every penny. I found out the hard way. A stick took out all the blades on my hst fan and it is a horrible job to to replace it. The little plate that comes on the bx23s does not protect that...

I’ve been using two the entire time I have owned it. After every day’s use I pull the outer filter and knock the dust out of it by thumping it on the tire. I learned that when I was a logger.

Years ago I had a 1974 Plymouth Duster and I took it to sears for an alignment. When I went to get it they said they couldn’t align it because it needed upper and lower ball joint’s, new tie rod ends, and a new idler arm. He showed me the movement of the ball joint’s, there was no movement...

I purchased edge tamers from them. I also got the trash hauler, the ball for moving trailers and the extenders. I also got their blade tamers. I got the blade tamers to use on the blade that I mounted to my backhoe.. When the snow slides off the roof on the back porch,, it is 3 to 4 foot...

Also only tighten the sear pins to 8 lbs. I was searing a lot of pins till I learned that one.

I have my shoes being fabricated at this time. They are going to be about 4" wide. I also cut a piece of pvc pipe that I put over the cutting edge. I'm tired of throwing gravel all over our pasture. Don't know yet if this will work but it sure can't hurt.

I got chains for both the back and front wheels on my BX23S. I used them once and haven't used them since. We get a lot of snow and have an uphill grade to our home. I have blown 1 and 1/2 feet of snow with no problems at all. Now watch, after saying that I will have problems this winter.

I have several different brands of implements for my BX23S. The other brands a less money and do the same job. I also have a quick hitch and it makes changing the implements a breeze. It is so simple to just back up to a different implement lift it up, lock it down and it's done. The quick...

I took mine off a few years ago while we were building out home. I took it off on a piece of plywood and it sat there all winter. When I tried to reinstall it it had sunk 8 inches on one side and the tractor also sank in the mud. I tried to get it on for 2 days and could not get it on. I...

Check air filter

I have a quick hitch and use this same attachment. It works absolutely wonderful. I also have the stinger that has 3 different sized balls and a hook. It’s the best.

Still have mine on. My property looked just like yours this morning. 8 inches of new white stuff and used my blower again today. Some of the drifts were a foot and a half. Winter just laughs at us.

When I worked as a logger we took the air filters out of all the equipment daily. We just would knock the dust out by hitting the equipment with it. Thump, thump, thump and when the dust quit coming out we put it back in. This is what I do daily now with the tractor. When it dry and dusty a...

We are having a heat wave here in Idaho, It's only 20 below here.

Not very much. I just did the 200 service on mine and didn't have to add any fluid at all.