Recent content by Warlock003

Sorry I should have written I have like 3 inch or 2 inch wheel spacers the issue is the top of the tire to the Loader controls not the inner side all of the tire. The top of the tire R14 is about 1.25 inches from the loader controls what's going to happen with chains and or what if one gets...

Im going to try plowing without chains then I heard you can run BX1880 RIMS and tires all 4 must be swapped aka 4wd gearing . the BX1880 tires are 3.5 inches smaller I am "hearing" can anyone confirm the height is 3.5 smaller on the bx1880 tires and rims and or any other issues or is this "THE...

I have chains for my FOAM filled skid steer. I had those same tensioners and every rubber band spider etc. Then I talked to guys with Skidders and BIG logging equipment. Make sure valve is at top of tire aka 12 noon Air down the tire "A BIT" put the inner tire chain connector together then the...

Hello why does Kubota insist and not providing any clearance between tires and inner fender wells example for chains. Honestly is MIND blowingly stupid. ok Im over it. I love my BX23S but when I went to sling a chain over the right hand tire when seated right tire) and noticed 1.250 clearance...

Oil comes out with the valve in either direction.... MANY thanks got it KEEP lever in a straight position when plugs are in Snowblower attached I believe the lever was pointing outward to divert fluid to snowblower lift and lower Valve. I like the quick-connect valve idea or like the...

Valve gushes oil eaither position of level I assume that's why they use plugs

Sorry if I double posted pictures Ill Get to know my left and Right and my other right soon enough my apologise and MANY GENUINE super thanks to you ALL GREAT people wishing you ALL good luck with everything in life and hopefully you catch the help you need when you need it thank you Eddie

Hi Thank you all for the links to the books and manuals it appears that from the facory the Oil Plate or Oil block comes with 2 plugs in it if you search for like an emay part the pictures show many all plugged up but I wanted to verify because mine hade hoses in it and I did not get the plug...

Thank you all SO Much I posted pictures of my tractor valve the one with fittings in the valve - Hi So I'm can't make a comment either way regarding making the LOOP but the images I find of the FACTORY valve AKA like virgin factory oil valve shows Plugs installed and the snowblower installation...

B6200 removed the snowblower and the hoses attached to the Tractor block off plate on the tractor with a lever. valve and ports pour oil with valve in either position gushing oil how to stop? I bought the tractor off an estate so did not get some parts I am missing the oil block off plate for...