Recent content by Underdawg

I changed both.. However, the manual states 3.8 gallons of UDT2 in Tranny, and I put 3 in it, and it was at the top line on the dipstick. I have since ran it so maybe the fluid got into the lines and will look at level. But I emptied it all and only one nut to remove for engine and hydro oil...

Yeah I was suprised my self. did some grading and little clearing out, so I will check oil in the morning. Didn't fit near the amount of oil the manual stated so I will double check dipstick in morning.

Well I did my service, some things to share. Hyro screen wasn't too bad but I couldn't see through it looking at the sun. Soaked in Diesel fuel and wow, to my suprise there was a spring in there. lol Makes sense now. But wow, what a difference changing the fluid made. I can pick the tractor up...

If your getting up to 50 acres and both have the mower option, you should go with the b3300. I own a bx and it's perfect for my 6 acres. Depending on what you want it to do, 50 would be fine, but always go bigger..

I don't have the BH750 , but I have the BH6000. The dealer told me that Woods, actually makes the Kubota BH's.

Jerry.. I just purchased a BX2200 2003 ( I think).. Had 575 hours on it, with Backhoe, 60 " MMM and FEL. Paid $9200 out the door. Got a Box scaper new for $425.. I have 600 hours on it now, and just burried 62 Post's with a post hole auger I purchased, put up a temp garage and smoothed dirt...

Well, I went ahead and bought everything for 600 hr service from dealer. DIdn't want to mess around with the other stuff. I spent most of my cash on this and don't want to ruin it to save $40 when I spend $9500.. :) I look to be doing this soon. I did manage to get 62 posts in the ground. The...

OK GWD.. You have convinced me to stay with the Kubota UDT products. I believe the dealer has the Super UDT2, which from what I understand is a synthetic. I will buy what he through in when I bought the tractor, I think that's what it was. By used the BH, does it require me pulling more fluid...

Thanks GWD.. I was looking to save some money. $40 vs. $120 for the UDT2. Considering I need the filters, and Engine oil as well, was trying to save alittle. I will shop around. From what I understand the tractor was purchased new in 02 from the dealer I purschased it from, and the first 2...

Getting ready to do my 600 hour service, perhaps this weekend. I purchased a Post Hole Auger and going to create a bunch of holes for horse fence. GWD, I have the UDT2 fluid, I'm going to try the TSC stuff, that's reccommended on here since it's about 25 mins closer than my Dealer. However, I...

I see GWD.. I will have to get some UDT oil from the dealer. I think I need like 3.8 gallons. It's very hard to see on the dip stick so I want to make sure I have enough. lol Orderd the pivot bolt, and will work onthe the other items as I go. I know the BH is losing some pressure, as it sits...

Pardon my ignorance, but what do you mean by the screen? The screen behind the radiator? And your talking about the fluid you put in the back of the tractor, transmission/hydro fluid?

Update... The manual states the Axle Nut should be at 15Ftlbs. Once I took the cotter pin out, it was probably around 1 ft lb. So I tightned it up cleaned all the oil up and drove it around. Looks like the oil is coming from the seal on the axle, not the head of the bolt. Looks like all the...

OK, just incase your following along. ha ha. I had the hose connected after I took the BH off, dealer told me that several times. Update... So today I put the BH back on and the front end comes up without a hitch with the BH on. Obviously the weight on the back makes the difference. I put...

No need to give me manuals, I have have them. I don't have a parts manual for the tractor if you have that one, I would like it. lol I have closed the loop in cables while unloading the backhoe. The transmission fluid was clear. In fact it took me a min to even see it on the dip stick. I plan...