Recent content by TxFireman

Ok thanks. The clutch is definitely engaged, as seen in the video (not just the pulley). If I turn the AC switch off, the clutch disengages. I have a vacuum pump, gauges, etc. I’ll probably go ahead and do compressor, drier, expansion valve and a flush. I really don’t want to do condenser and...

I agree. Looking around now for compressor, drier, and expansion valve at least. Trying to device on weather or not to grab a condenser and evaporator. I’m a do it once kinda guy, but also trying to not spend a bunch of $$ on things I don’t need.

but if the low pressure cutout kicked in the clutch wouldnt be engaged would it? it seems to be engaged in the video, shaft spinning. https://youtube.com/shorts/ntOSL7GDKe4?is=aHOMFrVvcYc-6uvH

I'm not sure if the video worked or not, but it appears the clutch is engaged and the shaft on the compressor is turning https://youtube.com/shorts/ntOSL7GDKe4?is=aHOMFrVvcYc-6uvH

Any aftermarket parts worth using?

I picked up a 2013 M7040 with 1400 hours from a family member. They stated “AC doesn’t blow cold”. After checking a few things I’m assuming compressor is shot! I have already: Cleaned cabin filters Inspected evaporator under seat (all clear) Cleaned condenser and radiator Installed shutoff...