Recent content by tozlakes

I have a B3030 cabbed model that I have had for the past 5 years or so that is likely the most unstable POS I have ever owned. If you get on the slightest of a slope (Maybe 10-20 degrees) and it is ready to roll on its side. Already ended up there once with my Father In Law running it on his...

I recently bought a B3030 with the cab and talking about feeling like its ready to roll at any time. I've had many Kubota's in the past and they never felt like this. My issue is that the front wheels are probably only 40" apart and the rears may be 4' apart. There has been a couple of times...

I just bought a used 3 point tiller that is orange and has the Kubota sticker but no ID tag or numbers that I can see. I notice that there is lube points for all of the universals and I filled the upper gearbox to slightly over half full as most GB. My problem is the side of the unit with a...

I recently bought a new cheapy $600 3 point post hole digger for my B3030C but go through the bits like crazy. In the past I had a digger with carbide tips, two prongs on the plug in portion and four or five carbide tips on the cutting edge. I think they just plugged into a receiver on the...

That was exactly the type of feedback that I was looking for. With no experience with a tranny of this sort it just seemed like I either had something not adjusted right or was just not used to its operation. Another thing I found odd was the lever to raise and lower the loader bucket. When...

I recently bought a used 2007 Cabbed B3030 with 250 hours on it. First HST tranny I've owned and maybe everything is normal? It just seems that when I push on the forward or reverse pedal there is an excessive noise that sounds like fluid passing through a hose or an oriface. Is this normal...