torch's latest activity
-
torch replied to the thread A little Machinist advice please.Not sure when you need this by, but given it's for a lawn mower, I assume you want it before the winter. ;-) I've been giving the 3D... -
torch replied to the thread A little Machinist advice please.Nice. He might need a spacer to ensure it is correctly aligned with the drive pulley, but that could work. The pulley does say it is...
-
torch replied to the thread A little Machinist advice please.Ok, so I think I have all the numbers now. If I was to machine a new pulley from billet, it would probably look like this (although I'd...
-
-
torch replied to the thread A little Machinist advice please.Not a problem actually -- the 1/8" broach is an A width as is the 3mm broach. I tried it and the 1/8" fit perfectly in the 10mm bushing...
-
torch replied to the thread bucket tilt.Glleneben, Dan is HIGHLY knowledgeable in hydraulic systems and well worth listening to. The first rule of troubleshooting is to...
-
torch replied to the thread A little Machinist advice please.Sorry, I meant the other way around, to account for the off-set. I estimated it at 26.8mm here:
-
-
torch replied to the thread A little Machinist advice please.Of course, it's not much more to go from just a hub to the entire thing. I bet this would be especially nice in 6061-T6 aluminium:
-
torch replied to the thread A little Machinist advice please.I assume this measurement is to the end of the bore? What is the overall distance from the face of the pulley to the end of the bore...
-
torch replied to the thread A little Machinist advice please.Is that in CAD or USD? How much for shipping? I did a quick google of the part number and found several sources. Price with shipping...
-
torch replied to the thread A little Machinist advice please.I bet it's not a typo -- If you click the description, it contains the remark " (SUB FOR M114270)" another link Square key stock kit and...
-
torch replied to the thread A little Machinist advice please.Good catch. Many manufacturers don't give specific sizes in parts diagrams, just their own part number. Nice to see JD is giving the...
-
torch replied to the thread A little Machinist advice please.Yeah, in retrospect I think you are right. The numbers would make sense too -- with a 1/8" x 1/2" Woodruff key and standard slot depth...
-
torch replied to the thread A little Machinist advice please.I changed my mind. Maybe it is a Woodruff key. Yeah, the dimension IS awfully close to a 1/8" key. I hadn't noticed that and it's...
-
torch replied to the thread A little Machinist advice please.I'm not surprised. Digital calipers tend to lull one into a false sense of accuracy. The display shows a precision of .01mm, but the...
-
torch replied to the thread A little Machinist advice please.Adding in your measurements (and assuming for the moment that the weld-on pulley is the same thickness as your pulley at the hub and the...
-
