torch's latest activity
-
torch replied to the thread Hydraulic Question.It's built into the control valve set. The backhoe controls have internal passages to route the flow in the bank of spool valves... -
torch replied to the thread Kubota B6000 Aux Hydraulics.On the B7100, one has to chain the lift arms up when using the under-seat diverter valve. At least, if a 3ph implement is installed...
-
torch replied to the thread Pros and cons of snow removal options.If there is one, I'd love to hear about it for the same reasons. I've tried the toothed bucket. I tried the roto-tiller. No Joy. The...
-
torch replied to the thread Backhoe on a BX2380?.That explains why people thought the brackets were welded to the tractor at the factory.
-
Yes , the brackets removed from the 23S were heavily reinforced. The rear part of the 2380 frame had to be removed (also bolted on) and...
-
I am new here and don't want to step on anyone's toes with this reply, but I just bought a wrecked BX23S with a good BT603 backhoe and...
-
torch replied to the thread loader arms lift *very* slowly.Another possibility is the internal layer of the return hose may have collapsed or torn, blocking flow in one direction.
-
torch replied to the thread Summit Hydraulics.What this world needs (or at least, my world) is a FEL joystick operated dual spool control block sized for around 5-6gpm, in keeping...
-
torch replied to the thread B2400 HST 4wd - Partially stripped bolt housing.It seems to be discontinued by Loctite. Just what's left in the supply chain now. Make sure you have the hole absolutely clean. Use...
-
torch replied to the thread B2400 HST 4wd - Partially stripped bolt housing.I would try a heli-coil there. The other alternative is Loctite's "Form a Thread" repair kit. It's an epoxy that you apply to the hole...
-
torch replied to the thread B7100 Hydraulic block diverter (70060-00360 or 70070-00385).Bump for those watching the thread. It's March and as promised, I made more. PLEASE REVIEW THE FIRST POST OF THIS THREAD FOR CURRENT...
-
torch replied to the thread Spring is coming....too early to get out of "Snow Mode"?!?!.I've seen 25°C on a sunny April 1 and a foot+ of snow two weeks later. The blower doesn't come off until the dragonflies come out.
-
Hey everyone, Mr. K here, sorry I'm late to the party. Will toss my perspective in here - 1/ Appreciate armylifer (and others) speaking...
-
torch replied to the thread Kubota B5100DT 3 point hitch falling.Thanks for reporting the solution. It will undoubtedly help the next guy.
-
After posting I stumbled across a B6100 thread with relevant suggestions, one being use the interia of the decending lift arms pushing...
