Recent content by thomps22

I have a G5200 and it has a G2546 blower on it. You will also need the quick attach hitch for underneath. I think these are rare. Keep looking though. I looked for 1.5 years for a deck for mine.

Hi, I had a similar issue. I was amazed how hard it was to get off. I took a piece of oak and used it as an extension for the hammer. I tried to direct the blows to the inner race of the inside bearing. Keep at it and it will come off. As long as the cotter pin and nut are off there is nothing...

I was able to attach the deck without any issues. Here is a pic of the front shackle mount locations for reference.

Well I mounted the deck this past weekend. (had my other rider seize a bearing on the deck). I will have to put off sandblasting the deck until this fall :( I greased all the spindles and checked the mower blades (which are in good shape) and then ran it. I was quite happy with the cut and it...

Hi all, I'm new to the board and this is my first post. I acquired a G5200 from my Grandpa that has a beautiful G2546 blower on it. It did not have a mower deck so I ended up running two tractors. One for snow and one for grass. This weekend I was lucky enough to pick up a RC48G deck for my...