TheOldHokie's latest activity
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.I dont understand. Did you connect the hoses going from the valve to the cylinders? Dan -
TheOldHokie replied to the thread Bradco 715 front blade attachment.That diagram would have been helpful about 8 posts back. Tĺhat the 3pt wotks in both direction makes no sense but I think your main...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.I think I smell a rat!!! Your blade has one double acting cylinder for up/down. That is opetated by ONE double acting spool on the...
-
-
All good Dan, thanks again.
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Disconnect your two new hoses from the outlet block and put the plugs back in. Start the tractor Turn the directional valve fully...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Here is a quick markup of the various bits as best I can determine so far. White = priority flow divider for PS Blue = system pressure...
-
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.OK. Turn the directional valve fully clockwise. Does the 3pt still work? Dan
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.You ckearly do not understand how the hydraulic system works. I guess we will have to sort the outket block out first. Forget the...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.I dont think the block is that much different but the plumbing is odd. The 3pt would normslly be fed frim the backside port and the one...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.So this is a three spool valve and the blade has three double acting cylinders? This appears to be pump IN or P. The top port is...
-
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.This is getting crazier by the minute. How many PORTS on that valve. I count 8 on the top alone. Any additional valves at the rear? Any...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Thats what worries me. Where does the second hose on that tee go? The only label I could see in the other pictures was OUT. Where does...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Something is very wrong there. There are some lsbels on the vslve ports thst I cant read. Post some pictures showing all of them. Dan
-
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.Your two new hoses are connected to pressure out and tank return in the OEM hydraulic outlet block. Where do they go? Where is the...
-
TheOldHokie replied to the thread Kubota UDT2 viscosity rating and has anyone used it in another oem zero turn?.The label clearly says 15W50 transmission and engine oil. HydroGear switched to engine oil in their transaxles some time ago.
