TheOldHokie's latest activity
-
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.I thought we covered 3pt first thing. Oh well. Your 3pt lift needs adjustment. There is a feedback linkage that automagically kicks the... -
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.Excellent. Make sure tgat auxuluary vakve is fully in neutral and ghe couplers are securely latched. The fact your 3pt is working still...
-
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.Bingo! What and where is this closed loop connection? Dan
-
I raised it and triggered the Float, and it sunk just fine! so it just seems like direct down pressure isn't working, but float is.
-
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.Whew! OK, back on track. See if it lowers OK in the float position. If so the problem is either one of the couplers or something down...
-
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.Hmmm. Thats an oldie and I dont know the details of thst valve. Even so I would expect a float position. If you move the joystick to...
-
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.You wont find anything about power beyond in your manusl. Yes I find it odd the beavior is different with engune off. Keep the position...
-
TheOldHokie replied to the thread L3650 Loader Trouble When Lowering.Engine on or iff shoild not not matter. Classic symptoms of an obstruction in the power beyond circuit. Raise loader to about 3 feet...
-
the lever that turns on my log splitter got moved slightly. problem solved
-
TheOldHokie replied to the thread FEL slowly goes down..Not exactly. When a spool is transitioned out of neutral there is a brief moment in time when the pressure at the work port thats being...
-
TheOldHokie replied to the thread la526 loader lifts slowly.It would be helpful if you told us if the hoe is mounted or not 🙄 This loader issue is a common problem with Kubota tractors and...
-
TheOldHokie replied to the thread la526 loader lifts slowly.Possible but that would slow down float as well. Dan
-
TheOldHokie replied to the thread FEL slowly goes down..One load check per spool. It is n the feeder passageway common to both work ports. Only one can be connected to pressure at any given...
-
TheOldHokie replied to the thread la526 loader lifts slowly.Your engine wont run at 540 RPM. That is PTO speed which corresponds to about 2200 engine RPM. The valve is fine. Sounds like your...
-
TheOldHokie replied to the thread la526 loader lifts slowly.The "hard spot" is the detent between the power down and gravity down (float) positions That is operating correctly.. What engine RPM...
