Recent content by sonny

  1. S

    Dash Battery Light Stays Lit

    Well on my tractor the light never goes out , and it never dims - stays brightly lit. In the spring I will pull the alternator and have new brushes installed. Until I will test voltage and when it drops below ? I will just slow charge my new battery
  2. S

    Dash Battery Light Stays Lit

    Started tractor , checked battery with meter - got 12.41 voltage , Check Alternator all connections are tight and look clean. Tried the metal - magnetic test and could not get my metal to stick anywhere on the Alternator - Maybe the light is just stuck?
  3. S

    Dash Battery Light Stays Lit

    Yep I think it might be the charging system, as the light has stayed on after installing a brand new fully charged battery. Any thoughts on what and how to check out the charging system ? Belt is tight , ground looks good , everything is clamped down and tight . Best way to check an alternator ?
  4. S

    Dash Battery Light Stays Lit

    I have a 1995 L35 and the Battery light on the dash stays lit . Thought it was my 10 year old battery ( I always had to put the charger on the battery prior to starting the tractor ) So I bought a new heavy duty battery and installed today. Well light is still on - any thoughts ?
  5. S

    1995 Kubota L35 - Looking For -

    * A new seat * Rear right tail lens * Right headlight * 2 working work lights - ( I have 4 on the Kubota but 2 are missing parts dam trees ) * New set of filters - Air , Oil , Hydraulic
  6. S

    Rust on Hydralic Cylinder

    Update : - I took a belt of fine grit emery paper and shined the cylinder up with wd40 as my lubricant. The rust pits became just small black marks. Next I soaked all areas with wd40 and hooked up the backhoe. It's been almost 3 years since I last hooked it up. I greased all fittings heavily (...
  7. S

    Rust on Hydralic Cylinder

    My Kubota L35 backhoe attachment has small rust pits on the main dipper stick. Anyone know how sturdy the seals are on a L35 backhoe ? Best way to clean the rust off? Probably about 30 or 40 smaller rusty abrasions on the cylinder. I had coated with white lithum grease prior to outside ...