Recent content by Sean2202

Excellent! Thank you! And from a vendor I know and trust. Win Win!

Not sure what you mean here? Not having a problem per say just want a different option for plugging the rear remotes when not in use as the factory caps have been lost. I believe my MX is a 5675 fitting. Interesting method for cleaning. Thanks. I looked up the caps for the M series earlier...

Yes, I believe this to be part of the problem. This is on the rear hydraulic connection. The rubber plugs and caps on the loader end seem of better quality.

Could I get some clarification between the couplers ISO7241B and ISO 6475. Can't seem to find anything on a google search for 6475 Did you mean 5675? Thanks

Yes, thank you!

Greetings, MX6000, great tractor. We use this commercially at the golf course. We have dual rear remotes factory ordered on this one. Is there a better option to cover the hydraulic ports on these? The factory covers have been lost on the two ports and the other two don't seem to stay attached...

In April 2021 my workplace purchased a Kioti RX6620 with a KL7320 loader, cab 3rd function and two rear remotes for $46,476. I recommended the Kubota MX6000. The tractor now has almost 1100 hrs on it. There has been some trouble with CEL. Limp mode, very sensitive fuel filter issues, F+R lever...

Greetings, Looking for some help cross referencing a cogged belt for a Kubota V2003T engine in a Toro Groundsmaster. The Kubota OEM belt is part #15469-97010. This is a smooth V-belt. This also comes from Toro as a smooth v belt. Basically, what happens in the design flaw of this machine, is...

Just throwing this out there. Depending on how much snow you need to move and where you are located, there is an option for a front mount snowblower for the B2601. We have a front mount blower on our Kubota LX2610. There is nothing like it. Put a back blade on the rear and your all set.

We have a 2601 with a belly mower at work. Nice machine. The drive over deck is nice and it's not too bad to take off. Belt changing is a pia. Keep a close eye on the gearbox mounting bolts and the fluid. Mark these bolts with a paint marker so you can see if they are loosening. Set those anti...

Welcome to the forum @rickls. I assume you first figured what tasks you were doing and sized the tractor to those tasks. We have a B2601. Purchased 3-7-22 in CT with RCK60-32 deck and three front suitcase weights with turf tires. Paid $21,638 brand new. Nice machine. Easy to maintain. Simple...

Check out this belt grinder from Trick-tools.com. An inexpensive way to get a belt grinder that is pretty versatile. The belts are super easy to change. I have used the course grit belts to sharpen rotary blades resting the blades on the top and tilting them backwards. The premium belts hold up...

Thanks for the replies. I would like to take the plug out below the thermostat housing as mentioned above. I would need the sender and gauge to match up. So far, I have found the v1505 in a B3030 Kubota tractor but the parts diagram for that model does not show a gauge or sending unit. If...

Greetings, I have a 2012 Toro MP5800D sprayer with a Kubota V1505 engine that I would like to install a temperature gauge on the dashboard. A little history with these units is its very difficult to clean the radiator. (poor design IMO). There is a dummy light and a high temp shutdown built...

Thanks for all the replies. I did not mean to open a can of worms here. I have gotten in the habit of running oil analysis on our equipment at the golf course. When this one is analyzed I will post up a new thread on it. Oil separator at 1500 hrs. We do on average 3-4 hundred hours per year on...