ScottRussellMT's latest activity
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Yes, as it turns out, I've fiddled with every switch, fuse, relay, and lever without any luck. Later in this thread I've shared some... -
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Copy. I followed the WSM for testing all of the switches to determine which one/s was/were potentially a problem. And I guess along the...
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.I’m really confused… when the WSM states that I should expect continuity across terminals A and D (when terminals C and D have voltage...
-
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.I just retested the stop solenoid relay and got 0 Ohms of continuity across terminals C and D when voltage is applied across terminals A...
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Good to know. Thanks. I wasn't getting any OHM continuity readings with this approach yesterday, so I'll reattempt today to ensure I was...
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Still working through WSM diagnosis procedures. This next procedure in question is for the OPC timer. Do I simply substitute "1" for...
-
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.The A and B coils are getting something like 60 Ohms. My uncertainty is with item 3 in the diagnostic test. When the instructions are to...
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Ok. This is a little update. Thanks to various members posting on this thread, I have some decent direction. Since the last post, this...
-
-
ScottRussellMT reacted to netspyder's post in the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance with
Like.
so... this might sound silly but since no one has mentioned it yet, have you fiddled with the shift lever? sometimes mine won't be... -
ScottRussellMT reacted to Runs With Scissors's post in the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance with Like.
This is a "less than ideal" way to test things, but here is how I do it. With the key in the "crank position", I wiggle the treadle...
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Haha! Nice. While not all the above are necessary true, it’s very possible that I have the meter set incorrectly. Thanks for helping get...
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Thanks for clarifying. I’ll check this out when I get back home this afternoon.
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.@GreensvilleJay many thanks. This is super helpful. Now I can try to reconcile my diag against the manual. Cheers!
-
ScottRussellMT reacted to GreensvilleJay's post in the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance with Like.
curious, found this.... https://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/ they list an L2501 WSM..... free.
-
ScottRussellMT replied to the thread MY2020 L2501 HST No Start, No Crank -- Looking for Diag Guidance.Dan, Thank you. Looks like I'll need to invest in the WSM. It appears there are a number of online sources. Any to avoid? Scott
