Sawdust&Shavings's latest activity
-
Sawdust&Shavings reacted to North Idaho Wolfman's post in the thread Diesel transfer tank with
Like.
Do yourself a favor, put the tank on a trailer and a battery with a solar charger. Then it's good to go all the time. -
Sawdust&Shavings replied to the thread What’s with all the SPAM?.As good as my home cured bacon is; it’s best when cut into thumb sized pieces and deep fried in duck fat for 12 to 18 seconds…though not...
-
Sawdust&Shavings reacted to Magicman's post in the thread What did you do to or on your Kubota today? with Like.
My pond levee had gotten out of control with volunteer Bald Cypress sprouts/saplings. That is until the Kubota KXO 40 mini-excavator...
-
Sawdust&Shavings reacted to nerwin's post in the thread What did you do to or on your Kubota today? with Like.
I'm probably going to regret this. But getting 12 yards of top soil delivered today. Impossible to get the dump where it needs to go so...
-
Sawdust&Shavings reacted to Bearcatrp's post in the thread Are all pallet forks created equal? with Like.
My 1st set was for a skid steer. Big mistake. To heavy so less lift. Found a place that makes them small tractors. Lite weight. Works...
-
Sawdust&Shavings reacted to GreensvilleJay's post in the thread M5400 won't start, have changed most everything with Like.
no, you need very little current ( say 1/10th of an amp to light up the dash but need 100s of AMPS to spin the starter. If you have...
-
Sawdust&Shavings reacted to ruger1980's post in the thread M5400 won't start, have changed most everything with Like.
First thing is to unload the parts cannon and then start testing with a multimeter. See attached
-
My B3200 is 32HP, but it identifies as 320HP!....... LOL
-
Sawdust&Shavings replied to the thread What’s with all the SPAM?.I’m sorry, but spam in a can or otherwise is just not good. I was stationed in Hawaii for three years and I did not like spam before...
-
One of the fronts on my G2160 ruptured and I needed someone reliable to replace both of them. Called a local New Holland dealer to see...
-
Sawdust&Shavings replied to the thread BX23S material collection system.On my second file there is a drawing for installation on a BX24, which is what was available back then before the BX 25 and now the...
-
-
Sawdust&Shavings replied to the thread BX23S material collection system.On my BX1870, I had to install two support stays for my GCK 60–23BX…these stay on the BX1870, I do not know if that is compatible with...
-
-
~80 tons of blue rock gravel delivered over the past couple weeks. Driver did a good job spreading it along the driveway. He started...
-
Sawdust&Shavings reacted to GreensvilleJay's post in the thread Using the drawbar to pull a trailer with Like.
You can limit upward movement of the 3PH by simply chaining it to the axle.
-
Hi! New BX owner, but a owned a compact NH for almost 25 years. Wheels on the BX are not reversible so I had the dealer install 2"...
