Russell King's latest activity
-
RRussell King replied to the thread BX25D/BX23S Swivel Seat problems.In your video (thanks for posting it) something looks odd at the two front corners to me. The far side is outside the frame and the...
-
RRussell King reacted to Grampus's post in the thread Help! Complete novice with fuel system problem. with
Like.
It is part # K2871-62250, the one activated by the HST pedal (there are 3 of them on the tractor in different places). I believe it is... -
RRussell King replied to the thread Help! Complete novice with fuel system problem..Please clarify which exact switch you replaced.
-
RRussell King replied to the thread L4400 fel not working.I am so confused by the replies. 1) How is it possible for fluid to be coming out of the tank return line with the tractor running...
-
RRussell King reacted to cjwilson78154's post in the thread Kubota f2100e starting to have clutch issue with Like.
Just an update here to close this one out. Clutch is all bolted in and machine is back together. Fired up and drove like it should...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.Look at the way the two cylinders are plumbed together. They will work in unison with just two hoses from the tractor hydraulics. I...
-
RRussell King replied to the thread G 5200 F.I. leaking near the top.I found this diagram on the Kubota illustrated parts site There is NO way that I would take anything off of the injection pump. It is...
-
-
RRussell King replied to the thread Metal hydraulic line keeps blowing.If you want a stronger line you will be able to get one at a Swagelok store (or similar). There are ZERO Swagelok stores so you may...
-
RHow do you know any of thst? The next think I want you to do is disconnect both of the two hoses going to the cylinders. Do that at the...
-
RRussell King reacted to Pawnee's post in the thread Zero turn Z242 mower belt way too tight with Like.
No. The mower was new this Spring so I'm assuming it is right.
-
RRussell King replied to the thread Zero turn Z242 mower belt way too tight.Are you sure you have the correct OEM spring?
-
RRussell King reacted to Ursa Minor Beta's post in the thread Cannot get stuck heat seal out ... need advice or ideas with Like.
With two more days of patient knocking with a home built pull hammer, heat and penetrating oil it did come out after all ...
-
RRussell King reacted to nerwin's post in the thread What did you do to or on your Kubota today? with Like.
Thanks! That's a good question. I guess it's a new england thing? I didnt want to add the two other line posts as it would look too big...
-
RRussell King replied to the thread Daily Chuckle.Just say words for what you see There is a Lion There is a Pizza There is a poop but use the more vulgar term S*** There is an Eye There...
