Russell King's latest activity
-
RRussell King replied to the thread Easier way to take off/ put on ballast box.Since it sounds like your main issue is with the two arm attachments to the pins, here is how I do that. 1) lower the arms below the...
-
RRussell King replied to the thread L3302DT PTO not turning.Did you remove any covers over the PTO shaft so you can see the splined shaft? Sometimes there is a plastic sleeve on the PTO shaft and...
-
RRussell King reacted to Another Tractor's post in the thread Forgot To Connect The Return Line, BX25 with
Like.
UPDATE Before I forgot to connect that line I had ordered a filter kit and was prepared to change all fluids and filters...I've been... -
RThis is why teh BX23S must remain upon the manicured lawn.
-
RBack in the mid-70's the family business was designing and installing fire protection systems. Grids of pipe, sometimes involving...
-
RRussell King replied to the thread Broken PTO on L275DX.Well I don’t 100% understand your statement but will just comment anyway about the PTO operation on my similar L185 but take them with a...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.See @WI_Hedgehog post above. I would give him a 99.5 out of 100. The slight deduction is because: 1) the yellow arrow is pointing...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.You might be able to crush a radiator by creating too much of a vacuum using a shop vacuum. Not sure but I wouldn’t be shoving the...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.The open port in the valve does not use any type of sealing tape or compound on the threads. There should be a steel washer and then a...
-
RRussell King replied to the thread Broken PTO on L275DX.There are many gears and shafts involved in that system. Near the back of the tractor is a coupler between the output shaft and...
-
RNot a big update but just to follow up. I verified nothing sticky, at least externally, on the injector pump. Pulled oil out to get it...
-
RRussell King replied to the thread Shredder Blades Binding Up.It sounds like the blade carrier may be worn out. You stated that you have new blades and new blade mounting hardware. The only...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.There are two different levels on any implement = front to back and side to side. You state your problem with words that make it sound...
-
RRussell King replied to the thread BX23S Loader Lift Issue & hydraulics getting hot – Seeking Diagnosis Help.I think you need to be 200% positive that there is good flow through the back hoe valve circuit. It is often a poorly seated coupler...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.Some engines have the tendency to get an air bubble caught in the block when fill through the radiator neck. Some reports say that the...