Russell King's latest activity
-
RRussell King replied to the thread Help me Shift L3710 out of 4WD.If you have that “small lever” it looks like you could easily loop something around it to help pull it up. Perhaps a rope or endless...
-
RRussell King replied to the thread blade bolts for GR2020.Then put a crescent wrench on the bolt head and then measure the distance between the jaws after you remove the wrench (being careful...
-
RRussell King reacted to chim's post in the thread What did you do to or on your Kubota today? with
Like.
Rest of the story (started in Post #23,313) Had enough spare time on Saturday to reinstall the fuel tank. It was a challenge for one... -
RRussell King replied to the thread What did you do to or on your Kubota today?.@PHPaul Looks good and you will be very happy with the tilt cylinder! A few comments and questions looking at the picture… The...
-
RRussell King replied to the thread L3560hstc shutting off.I second the suggestion on “debris” in the tank. Probably something that clogs outlet, kills fuel to tractor, then will move away from...
-
RWell, I FINALLY got to the root problem. I had lost the side weatherstripping. So chafe from cutting was light enough to find its way...
-
RRussell King replied to the thread BX22 Temp Gauge.I think you need to post a picture of your dash get a proper answer. There are individual gauges in the post #4 but you are describing...
-
RRussell King replied to the thread Need a little help swapping brushhog gearbox.@HowdyAcres You mis-understood the instructions. Hit it on the threaded side and drive it out towards the non-threaded side. Hit here...
-
-
RRussell King reacted to PHPaul's post in the thread What did you do to or on your Kubota today? with Like.
Got my tilt cylinder from FitRite today. 10 minute job to pin it on and find some hoses to test drive it. Slick! Really quality work...
-
RRussell King replied to the thread Need a little help swapping brushhog gearbox.You can download the manual here https://woodsequipment.com/products/rigid-rotary-cutters/brushbull-cutters/bb72-30/ It says it is a...
-
-
RRussell King replied to the thread What did you do to or on your Kubota today?.@nerwin For a retaining wall they make larger blocks similar to what you moved that will go well above 6 feet high. I would think...
-
RRussell King replied to the thread Never worked on one before, fuse keeps tripping.See the electrical diagram in post #13 of this thread -hopefully it is the correct one...
-
RRussell King replied to the thread ZD331 starting issue.Did you inspect, clean the ends of both cables? You may not have the correct amperage getting to the starter. You may want to try a...
-
RRussell King replied to the thread BX2380 starter engaging while running.See if removing the relay cuts the power to the starter solenoid wire. That way you know that the fix is related to the relay. Getting...
-
-
RRussell King replied to the thread Rear Hydraulics and Tilt Cylinder Lengths.1) Yes as I understand it! But you can return the tank return to anywhere on the sump, you don’t have to TEE in to existing line but...
