Recent content by rgOO6

I tried searching the forums but did not find anything. I am sure that someone has asked how to level the loader bucket on an L2501, so can someone point me in the right direction?

Hello All, Just curious what the safest way is to add weight to a tractor when moving a heavy load around the woods. I have ag tires and 4x4 but the tires just start slipping in the leaves and dirt. Is is pretty standard to temporarily add some weights to the front and back to try and get...

I wondered how long they would last when I saw them from the dealership that way. I looked around for a while at home depo and picked up some bolts and nylon lock washers. I actually ended up grabbing a wire lock pin (pictured). It fits pretty well and does not hit anything. I like this idea...

Pictures of the actual safety screw that is missing. You can see that the screw is installed with the nut on top because of clearance issues on the bottom.

Hello, My screw fell out on the grease pin. I would rather replace it with a solid pin that locks instead of a screw and lock nut. Anyone found a good option that works well? I attached a picture of the grease pin I am talking about. The safety pin is on the inside. The problem is that the...

Definitely will be following this post. I do not need anything more out of my L2501DT cause it does everything just fine, but boosting it looks incredibly fun. Just to restate the caution others have said above (I have done engine timing when I raced cars), you need to be really careful...

Quick question for the disc harrow guys. Is there a benefit to buying a more expensive one? I see prices kind of all over the place. I am leaning towards one that is adjustable, but not sure if the extra money is actually worth it. Anybody have any experience comparing a nice expensive disc...

I am still a bit torn on whether to get the QH15 or the PAT's system. From what I can tell, the PAT's seems to allow a broader range of equipment manufacturers. I plan to buy some off-brand subsoiler and plow attachments. So that is one reason I am thinking of going with the PAT's instead of...

I am been doing some more researching on this topic. Is there anyone running an adjustable/hydraulic top link with the PAT's system? That is what I am thinking about going with.

I did some reading on the drip line. It sounds like exactly what I need. I am planning to have a barrel that I will fill with water every day or two. I can run a header off the barrel to the end of the garden area. My area is slightly downhill, so I am planning to run the lines down hill. I...

One thing you might want to consider is noise control. I live in a rural area, but is becoming more populated. So in addition to having a good berm, I am also having to consider some walls to help cushion to sound. Some companies make some really neat round walls that slip right over the...

I am looking at making a water layout for my garden. It is not super big. I am planning to fabricate some 3' x 9' PVC frames. The frame will have tiny holes drilled all along the bottom so that I can just pipe it to a large drum and let the water slowly run out and water that section of the...

From a seller standpoint, I do not think you should sell a kit like this. If you want to give away the design, that is fine, but make sure there are plenty of "at your own risk" statements. Keep in mind that equipment manufacturers spend millions of dollars on testing and R&D so they do not...

I might take you up on that. You live in Kentucky? I actual had a trip planned up there but got canceled due to COVID.

Hey RBA50, that makes sense and helps explain the difference between the lift rating and implement weights. I won't worry so much about exceeding it. I have read of other people using bigger implements than the table (specifically with disc harrows). I will probably buy some implements and...