Recent content by Repair

  1. Repair

    Storage stand for my hydraulic auger

    I had an old hand fork lift that I modified to serve as a storage stand for my hydraulic auger.
  2. Repair

    L2501 - Hydraulic powered skid steer quick attach

    When I looked at the ones on Skid Steers the ones I looked at all used the pin hole style. Another thing is if it uses a clevis style it moves it father forward and I was worried about interference.
  3. Repair

    Rear 12v outlet for L2501

    Nice installation, looks factory but since I have a backhoe the bracket you used has been removed. What is the AMP rating on the light?
  4. Repair

    L2501 - Front bracket for dual front hydraulic systems

    The tree puller is definitely a thing you need or do not need, we live on 12 acers with 8 of it heavily wooded so I use it a lot plus it will pick up other things.....lol I just ordered the GR15 stump grinder so I now have to add rear hydraulics.
  5. Repair

    L2501 - Front bracket for dual front hydraulic systems

    The wiring for the solenoids.
  6. Repair

    L2501 - Front bracket for dual front hydraulic systems

    Finished the wiring, added the switch that controls the quick connect hydraulics.
  7. Repair

    L2501 - Hydraulic powered skid steer quick attach

    I don't see why not and it would save a lot of money, if you do it be sure to post it!
  8. Repair

    L2501 - Hydraulic powered skid steer quick attach

    https://www.magisterhyd.com/product/1-5inch-bore-x-16inch-stroke-cross-tube-hydraulic-cylinder/?gclid=Cj0KCQiA88X_BRDUARIsACVMYD9etgZH03U7IzxmMFhhM-janBu6eRlne-GPjs0Q3zx42f8m8BsOAJEaAseREALw_wcB I ended up using CAT 0 pins (I think).
  9. Repair

    L2501 - Front bracket for dual front hydraulic systems

    Thanks, I have these already.
  10. Repair

    L2501 - Front bracket for dual front hydraulic systems

    I have the solenoids mounted and tested, I plan to finish the wiring tomorrow.
  11. Repair

    L2501 - Front bracket for dual front hydraulic systems

    Sort of, I have a small one that goes on a press, looks similar to this one.
  12. Repair

    L2501 - Front bracket for dual front hydraulic systems

    I'm adding a second set of front hydraulics on my L2501 so I needed a new bracket so I built one. The last picture is the new bracket next to the one from Kubota.
  13. Repair

    Rear Hydraulic hose holder

    My 2017 and 2020 L2501 have rear hydraulics for the backhoe but when you don't have it on the hose for the rear hydraulics are in the way of the rear 3 point lift arm. I made this from an old tool box holder to keep the hose out of the way. I plan to get some of the protective cover fabric for...
  14. Repair

    L2501 - Hydraulic powered skid steer quick attach

    I have the Kubota third function kit but I bought parts to have 2 front hydraulic systems. I can post pictures of what I have once I get it put on.