Search results

I had an old hand fork lift that I modified to serve as a storage stand for my hydraulic auger.

When I looked at the ones on Skid Steers the ones I looked at all used the pin hole style. Another thing is if it uses a clevis style it moves it father forward and I was worried about interference.

Nice installation, looks factory but since I have a backhoe the bracket you used has been removed. What is the AMP rating on the light?

The tree puller is definitely a thing you need or do not need, we live on 12 acers with 8 of it heavily wooded so I use it a lot plus it will pick up other things.....lol I just ordered the GR15 stump grinder so I now have to add rear hydraulics.

The wiring for the solenoids.

Finished the wiring, added the switch that controls the quick connect hydraulics.

I don't see why not and it would save a lot of money, if you do it be sure to post it!

https://www.magisterhyd.com/product/1-5inch-bore-x-16inch-stroke-cross-tube-hydraulic-cylinder/?gclid=Cj0KCQiA88X_BRDUARIsACVMYD9etgZH03U7IzxmMFhhM-janBu6eRlne-GPjs0Q3zx42f8m8BsOAJEaAseREALw_wcB I ended up using CAT 0 pins (I think).

Thanks, I have these already.

I have the solenoids mounted and tested, I plan to finish the wiring tomorrow.

Sort of, I have a small one that goes on a press, looks similar to this one.

I'm adding a second set of front hydraulics on my L2501 so I needed a new bracket so I built one. The last picture is the new bracket next to the one from Kubota.

My 2017 and 2020 L2501 have rear hydraulics for the backhoe but when you don't have it on the hose for the rear hydraulics are in the way of the rear 3 point lift arm. I made this from an old tool box holder to keep the hose out of the way. I plan to get some of the protective cover fabric for...

I will.

I have the Kubota third function kit but I bought parts to have 2 front hydraulic systems. I can post pictures of what I have once I get it put on.

Ordered these orifices to slow down the ram. These are 0.094 but I can drill them out to increase the speed if needed.

I agree, this is the prototype so I expected to have to tweak things. I'm running it off the feed for my grapple and hydraulic auger but I plan to run a restrictor in the cylinder once I get the dedicated hydraulic system on and I plan to get a ram that has less travel

Thanks! It needs some fine tuning and it's time to get the second front hydraulics system on it. I plan to cut new arms that are up when open and level when down with a protective cover. I have the Kubota front hydraulics kit but I'm replacing the control valve with one from from Summit...

It works!

I tried to find a kit to buy, I even went to Kubota but I couldn't find a kit to have a Hydraulic powered skid steer quick attach for my L2501 so I'm building one. It works, still need to lube and make some adjustments.