PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..Do you have an owners manual? You need to make sure you have the directional valve set properly or you could have the same situation on...
-
PPoTreeBoy reacted to Old Machinist's post in the thread Adapted a Linear Actuator to a Pull Behind Spreader with
Like.
This is something I had on my mind since I got this little LX3310 cab tractor and finally got a round to it. I don't do enough seed or... -
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..The purpose of that linkage is to prevent dumping a load out the back of the bucket if the operator neglects to roll the bucket forward...
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..Yes, those quick disconnect couplings have spring loaded balls or poppets that stop the flow when decoupled. So, with the hoses...
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..Did that valve come off an L35, or a different model? I don't know of a way to test the relief valve except on the tractor. You could...
-
PPoTreeBoy reacted to TheOldHokie's post in the thread Kubota L35 big mistake on hydraulic loader valve looking for advice. with Wow.
BTW - you may not have considered the multiplication factor but you picked up on it immediatly. I also didnt think it completely...
-
PPoTreeBoy reacted to TheOldHokie's post in the thread Kubota L35 big mistake on hydraulic loader valve looking for advice. with Like.
The tank port limit is going to be 500/600 PSI but thats not a burst pressure. The old grey iron in those valves is probably getting...
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..The relief is set at 2489 to 2560 psi and the valve is rated at 3000. I don't see a spec on the tank passage. I didn't think about the...
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..The L35 is a plumber's nightmare. The fluid goes from the front pump back to the relief on the 3ph, then back up to the loader.
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..OK, it looks like the tank passage (low pressure) is the one that blew out. @Fluke216, make sure the tank hose is connected correctly...
-
-
PPoTreeBoy replied to the thread Kubota L35 big mistake on hydraulic loader valve looking for advice..You got it right. The boom section is in front (first), then the bucket in back. The implement pump flow rate is 11gpm, 17gpm includes...
-
PPoTreeBoy reacted to BBFarmer's post in the thread What did you do to or on your Kubota today? with Like.
Yea I mucked up the random photo thread about it pretty good with my antics LOL. Just something I've had a pretty strong interest in...
-
PPoTreeBoy replied to the thread What did you do to or on your Kubota today?.Duplicate
-
PPoTreeBoy replied to the thread What did you do to or on your Kubota today?.He mentioned his transition here, but it had been in the Works...
-
PPoTreeBoy replied to the thread Hydraulic fluid.This has been hashed a jillion times here, but I think the majority agree, more or less: if you have an older gear drive tractor a...
