PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread Woods BB60.I think it'll work fine. You may be more comfortable with some front weight.
-
PPoTreeBoy replied to the thread Front 3 point B4200.I think the earlier responses answer your front 3pt/PTO question. If you want a front mower, a different tractor, as @North Idaho...
-
PPoTreeBoy replied to the thread Question about BX steering.I can verify that the steering cylinder can be bypassing internally without leaking a drop externally.
-
PPoTreeBoy reacted to Charles n's post in the thread Adding a universal loader attachment to kubota L2202-m with
Like.
Yes thanks, They were on it when I bought it, making sure everything works nice together then I will make it right. Charles -
PPoTreeBoy replied to the thread Adding a universal loader attachment to kubota L2202-m.I'll be the fly in the ointment as usual. Those malleable iron fittings are not meant for hydraulic system service. They're meant for...
-
PPoTreeBoy replied to the thread L48 glow plug problem.#010, 020 is the glow relay. There was a serial number change, yours may be slightly different. The controller has six wires.
-
-
PPoTreeBoy replied to the thread L48 glow plug problem.Yes, the lamp is driven by the glow controller, not the relay. When mine started acting this way, I replaced the controller and that...
-
PPoTreeBoy replied to the thread L48 glow plug problem.I don't have access to an L48 schematic but, if the light is coming on, the culprit is more likely the glow timer, assuming it's similar...
-
PPoTreeBoy replied to the thread B6100 fel, hyd pump, drive, and mounting bracket. Possable doner models?.As TheOldHokie said, use the same Universal Tractor Fluid in the transmission and hydraulic system, if you go separate. I think that...
-
PWith the original geometry that was based on plywood and cardboard models, I ended up with a total bucket rotation of 110 degrees with...
-
PPoTreeBoy replied to the thread B6100 fel, hyd pump, drive, and mounting bracket. Possable doner models?.The PTO on the B6000 runs 'backwards' but I think the engine runs standard rotation.
-
PPoTreeBoy reacted to RMS's post in the thread What did you do to or on your Kubota today? with Like.
Bought a kx033-4 and it was delivered today. I probably will never fully use it but when it is used it will be fun.
-
PPoTreeBoy replied to the thread temperature sending unit 1999 l2900.In Kubota land, black is almost always ground.
-
PPoTreeBoy replied to the thread Oil filter change on L2502.If you just unscrew that filter you're going to drain way more than a gallon, unless you're mighty quick. Option 1 Pull the plug, catch...
