PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread l3710 gst Starter stays engaged.I'm confused what we're working with, an L3710 GST or L3010DT, but they're about the same electrically. Here's a wiring diagram, pretty...
-
-
PPoTreeBoy replied to the thread intergal on/off switch for Nilight Led Pods 2Pcs 18W 1260LM Flood Lights.I had a similar situation. I bought four lights on sale at TSC to use for front/rear work lights. After thinking about switches, I...
-
PThank you everyone for the recommendations. I ended up going with the Precision Manufacturing Mini 322. The dual jaws made from AR400...
-
PPoTreeBoy reacted to McMXi's post in the thread Implements that pull on the drawbar and the world of good enough. with
Like.
I think that the additional six coulters did an amazing job of chopping up the ground, and the only issue I ran into is that some of the... -
PPoTreeBoy replied to the thread BX23D with Starter Relay No Crank Issues.Yes, but the diagram in the WSM Electrical section would sure help.
-
PPoTreeBoy replied to the thread BX23D with Starter Relay No Crank Issues.Sounds like multiple problems * Having to move the pedal to start sounds like the linkage needs lubricating, adjusting, or a bad switch...
-
Phttps://www.amazon.com/M12x1-25-Banjo-Bolt-System-M12-12MM/dp/B0BDK9F2H7/ref=sr_1_8?crid=3TZ4RARWBEUL8&dib=eyJ2IjoiMSJ9.hA1qX6NPefiwYAnjU...
-
PYou may need to add some 90 degree fittings at one or more of the ends of the lines to make them fit better. Or 45 degree fittings?
-
PPoTreeBoy replied to the thread Daily Chuckle.When I was a kid, we didn't have dial phones. You picked up the receiver and a lady asked number please? I still remember our home and...
-
PPoTreeBoy reacted to Selkirk_D's post in the thread Just about ready to give her a workout! with Like.
This weeks progress, 18 poles set, 4 to go. 2-1/2 pallets of 80 lb bags. Good thing we had a couple 20 year olds working for us!! Frame...
-
PPoTreeBoy replied to the thread Rear hydraulic hose interference on lx2620.Make sure you use fittings designed for >2000 psi. Not plumbing fittings from Lowe's, HD, TSC or local hardware store.
-
PWe mow three houses, orchards, blueberry patch with our B26 on our rough wooded hillside farm. Backing under landscaping or creek and...
-
PPoTreeBoy replied to the thread La525 loader fitment.Should fit. Make sure you get the frame mounts and hoses...
-
PPoTreeBoy replied to the thread What did you do to or on your Kubota today?.You can air those front tires up, put a load in the bucket with no rear ballast, and get pretty good compaction.
-
PPoTreeBoy replied to the thread Rear wheel problem.You're in luck, I don't think that's a US model:
-
