PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread Newbie in Western Carolina.@PaulL makes a good point. All compact tractors have a short wheelbase and high CG. Hang a lot of mass off the ends and they tend to...
-
PPoTreeBoy replied to the thread Implements that pull on the drawbar and the world of good enough..I never heard of putting coulters on a disk. But I guess anything that slices and dices should help. My concern would be taking weight...
-
PPoTreeBoy replied to the thread Kubota b2150 HST not working.You can do what @ruger1980 suggested in post #61. In an early post, I mentioned testing the pressure at the transmission, but it...
-
PPoTreeBoy replied to the thread How to start diagnosing crank-no-start on a kubota common rail diesel.This is coming from left field, but are you maybe wiggling a power wire from the battery clamp when you connect the charger clips? Have...
-
PPoTreeBoy replied to the thread Newbie in Western Carolina.Consider a B26. A new one is pricey, but if you're willing and able to do repairs, a used one might fit the bill. They're built for the...
-
PPoTreeBoy replied to the thread How to start diagnosing crank-no-start on a kubota common rail diesel.Is the cranking speed normal? I think I've read that a certain rpm is required before the ECU? will fire the injectors.
-
PPoTreeBoy replied to the thread M9540 engine life expectancy.@lugbolt mentioned the PTO brake. This may not apply to the Kubota, but our Ford's manual recommends reducing the PTO (engine) speed to...
-
PProblem solved. I ended up installing a garage door opener. Now it pulls the door all the way up. Expensive solution but it has the...
-
PPoTreeBoy replied to the thread Engine Straining on Hills.Pressing the pedal is like shifting to high gear or overdrive, not what you want when going uphill. Is the throttle wide open? Does it...
-
PPoTreeBoy replied to the thread BX Driveshaft play normal and wont go in gear now?.If you don't have one, there's a WorkShop Manual free download for the BX1800/2200 available at KubotaBooks. I think you'll find it useful.
-
PPoTreeBoy replied to the thread Who did I piss off??????.Are you maybe thinking about Makita? Mine is now orphaned.
-
PLooks like a limit switch, don't know why it would be hanging there, doesn't belong on a tractor
-
PPoTreeBoy replied to the thread Switch Identification.What's on the end of that push-pull cable? I assume you haven't owned this tractor since new?
-
PPoTreeBoy replied to the thread Kubota b2150 HST not working.That sounds like a good plan. Since the power steering works there should be adequate flow to the hydrostat. The relief (back pressure)...
-
PPoTreeBoy replied to the thread Kubota b2150 HST not working.Can you remove cap 1 and catch the flow to measure it? Should be 1.3gpm.
-
