Recent content by Phil Johnson

Will sse I will try and get a good quality gauge something made in the USA.

Can you tell me what Quick Couplers you used and the part number if you have it, you are right the 2380 and the 23S is the same. Thank you

Thanks

Thanks the first thing I will do when I get setup to do it is check what the pressure is now and it should be set at about 1750 PSI from the factory if it shows that then I will know the gauge is ok. I’m always very careful when doing something like that and always want to make sure it’s done...

The best thing I can tell you is to go to YouTube and put in Increase the hydraulicpressure on a Kubota BX23S or whatever Tractor you have, If you are happy with your lifting power I would say leave it alone, for me most of these Kubota’s like mine is running about 1750 PSI and 1950- 2000 PSI...

You got that right I’m into my BX23S for around the same price as you and you can buy that Quick disconnect from summit for about $40.00 delivered to me here in Canada, I have sent a email to Summit and asked them if they have one for the BX23S, I have a Lathe and Milling machine so I can just...

It do they are on ebay but I need to know what company makes them and make sure it will fit, my BX23S it has the 4 fittings on one rac so when I remove all 4 I want the correct fitting to fit on one so i can check and adjust the hydraulic pressure. thank you

Yes I have seen that but I want to make my own much cheaper Thanks

The problem is Summit has them but they don’t say that it fits the Kubota BX23S that’s why I’m hoping someone on the Form has purchased one and can give me the info. Thank You

I have a Kubota BX23S and I want to make a Hydraulic Pressure Check system and I’m hoping someone can tell me which quick cupler to order from Amazon.com, I’m new to the form and was pleased to find it. Thanks