Recent content by Pat kikendall

My son in his infinite navy wisdom decided to remove the delivery valves due to stuck lines in order to remove the head from the engine. I’ve reinstalled the valves but cannot find how to reset them so as to install the lock mechanism. Where can I find info to properly test and set the locks?

Thank you for your reply, I guess I’m really in the shit now. First, please fill my empty head as to what you refer to as the fuse test? I tried finding it online but there was no reference. Are you referring to how the head gasket crushes?

Like an idiot I pulled my head off of my L3200h tractor and pitched the gasket before I knew there’s six different gaskets for the d1503 engine before I found out that I needed the numbers off of the gasket to get the Right one. how can I determine which one goes with engine? Thanks

Tractor lost power while bush hogging the pasture. It stalled out when backing into cut grass off of my lagoon. I restarted the tractor, it acted like the engine had started to run backward. Shut off the engine and restarted the engine again it sounded like I dropped a valve. Brought the tractor...

Hey Dan, I m sorry that it became I forgot that I use a hydraulic cylinder as the drag link is on remote 3. So still a remote issue

Hey Dan, again thank you for your input, I greatly appreciate it. Mostly on extending. I run a grapple on one remote and it does the close or extension of the the cylinder. And on the retraction of the the three point hitch, which will drop the hitch when you are trying to float or raise before...

Hey Dan thanks for responding, no. I have three remotes, and 2 of the three remotes two of the three are suffering the same symptoms. The third I haven’t used for a while do to the pin dropping out of the handle. On the drift I have to keep tightening or adjusting the load

Hydraulic remotes, when I try to raise an object it first wants to drop the lifted object. And will not maintain level.