Recent content by parttime1017

  1. P

    B219 Lift Cylinder Specs?

    Sorry... I ended up using Ebay to purchase my cylinders. They came from Surplus Center thru EBAY. The part numbers were in my notes and I didn't check to see if still alive. Price was cheaper thru Ebay.
  2. P

    B219 Lift Cylinder Specs?

    HYDRAULIC CYLINDERS, 2" BORE X 16" STROKE... 26 1/4" CLOSED PIN CENTER DISTANCE... NORTHERN TOOL #39042016...SURPLUS CENTER #9-4300-16
  3. P

    Black Mold - How to remove it?

    Peroxide 12% is good for killing black mold. 3% will work but takes longer.
  4. P

    B7100 Hydraulic block diverter (70060-00360 or 70070-00385)

    The outboard motor companies somewhat solved the problem by using 304 or higher stainless bolts. That is what I used in mine.
  5. P

    Give me you email. For some reason I can't send it from here. Mike

    Give me you email. For some reason I can't send it from here. Mike
  6. P

    HAPPY FATHER’S DAY. What was your favorite car?

    My Favorite was a 1959 Chevy Convertible. 4 barrel carb and dual exhaust.
  7. P

    Kubota b7100 FEL build on a budget

    Guys..If you must wear regular clothes (while welding or grinding) make sure they are mostly cotton. Poly blends will burn hotter thus burn deeper into you skin.
  8. P

    Kubota b7100 FEL build on a budget

    B219 plans, (I have) show that the bottom is 35" to the outside. 30" to the inside of the towers.
  9. P

    Box blade

    Wide enough to cover wheel tracks. 60"
  10. P

    Just puchased 6 acres, now what??

    If you don't have to, don't combine all three lots. It's nice to have an a extra lot you can sell if need be. Keep all building within the lot set back lines. You can build your shop on one lot and house on the other. Sell either one if and when you want.
  11. P

    B7200 HST new owner wondering about 3 pt capability

    Figure about 100# difference of lift using a quick PTO hitch and not. I use pallet forks and the rear bucket dealing with firewood. The amount of weight you need on the front is considerable. I decided the front end loader was a lot easier to control and easier on your neck. I'm in the process...
  12. P

    B 6100 Tractor, New FEL.

    And for some reason still are cheap in comparison to small ones. Surplus Center has them on EBay for cheap. Why Ebay, who knows.
  13. P

    B 6100 Tractor, New FEL.

    You're right. Oh well, pump will also fit on the front. Just need to do a little metal working. Thanks
  14. P

    B 6100 Tractor, New FEL.

    Thanks guys for all the info. I have a hydraulic pump that fits the PTO, I may use instead. From the comments it sounds like the onboard pump may be very slow. I don't use the PTO at all and it's not too late in my build to make a tower the reservoir.