Recent content by pak

I have a 2015 B2601, snow blower B2782 and subframe mount B2798. The yoke on the PTO driveline is getting worn and the yoke is wobbling on the subframe spline. the yoke covers 1 5/8" of the spline. I am trying to figure why there is wear at all since there is no movement of the spline/yoke...

My 2015 is the same. Never goes above about the 1/4 mark.

I have a kit that has Safety Seal on the case. It has a heavy duty needle/replacement, hole sizer and plenty of plugs. I have had this for over 10 years. I've plugged car, light truck and tractor/trailer tires plus my little tractor tires. Would not be without this.

Bingo! This appears to have fixed the leaking. The air pressure was low. Thanks, neighbor.

I had been noticing brown blotches around here and there in the snow. Zeroed in on the beet juice is leaking around the interior rim, of the rear tire(ag type). Are there any quick fixes for this? Looks like I will add air as necessary then take the tire/rim in for a cleaning and refill. Ain't...

I got a bucket, pallet forks and a front mounted snow blower with my tractor when new. I think these are Kubota products. All are well constructed units and have performed very well. I have a backblade by Land Pride. It is well made also. I see other back blades that have an offset so you can...

Update: I received my Land leveler the other day. I got the EM Land Shark sized for my 2601, as per their recommendation. This is a quality piece and works as advertised. Took only about an hour to dress up my 1/4 mile gravel road and gravel yard area. I will buy from them again.

I watched 300 hours roll up on my B2601. Almost 3 years to the day after delivery. This machine has been stellar.

Today, I was tinkering around and wanted to see if my RR would fit on the bottom of my back blade. I have a B2601 with a LP 1560. The RR fit right on it. Since tractors with 3 pts on them are stronger pulling than pushing, I found this made the RR much more effective tearing up grass, roots and...

I'm looking for a source for Kubota air filters. Looking for a good price not necessarily the deal of the century. Thanks, pak

I am getting ready to add to the attachment collection, for my B2601. Possibly a tiller, disc and land leveler. Has anyone had any experience with Everything Attachments? Their stuff looks very good but I don't know how they compare with say KK attachments. KK stuff is much more available where...

You are going to really like that blower. Have the dealer throw in a bunch of shear bolts for the blower. I would also recommend a backblade and forks. I have a b2601. These tractors are handy as a pocket on a shirt. Mine gets more use in winter than summer. Stay warm.

Even better!

I have chains on the front only of my B2601 with a B2782B front mounted blower. I keep them tight. Any hardwear store will have a large selection of springs of many lengths and diameter. Without the chains directional control would be very poor.

Re: Tips on how to removing 3-Pt attachments Pat's does have an adjustable spreader for the arms. Your first post about sums up what is needed for easier hook ups. Make sure you drop on level ground. I drop on 2x4s. For me the toughest part is hooking up the PTO. not because it is complex, but...