Recent content by Orange Beast

I ended up flushing and draining it 7 times and had almost clear water in the end, no green just a tad yellow. Figured that would be sufficient. Got it all filled back up, new block heater installed, no leaks....... and then I noticed that my lower bottom water hose has been chewed up by one of...

When draining, I am only getting about 4 qts out and it takes 5.7 according to the manual, so I must be missing something?

Thanks everyone!!! just drained the system and Just thought of something else while i am flushing.. I have a cab, so is there anything else special I have to do while flushing? Do the antifreeze lines go up into the cab for the heat? if they do how do you ever get all out of the system...

I like the idea of the Zerex G05, so if i decide to switch to the Zerex would I need to flush the green out with water before i refill? Reason I ask is Zerex appears to also be a EG coolant also but with more additives if i am understanding it correctly?

Good evening, I will be changing my antifreeze this weekend. I went to the dealer to find out what was put in my B2650HDSC from the factory and was told to put anything in..... Well I'm not quite that stupid! So in researching this, I see on a few previous posts that green is the way to go...

Good evening everyone, Unfortunately at the end of last winter my block heater took a crap at only 200ish hrs. Talked with the Dealer and they have no reasons as to why or any other info so here comes the big question. Has anyone ever replaced one of these without completely draining the anti...

Well Yes I agree but this is like almost twice over the full mark? Seems odd to me, have never had this happen with my other tractor..

Hey everyone. I just changed my trans oil and both filters along with my front axle oil on my B2650. According to the manual i am to fill as follows: Front axle oil-----5qts Trans oil -----4 Gal. sooooooooo the front axle reads a perfect top of line on full BUT the trans I am showing way...

So I guess the only other thing I was thinking is do I: A. replace the 2 hyro filters and top off,or B. Replace the 2 hydro filters and all new oil? Manual shows not to replace oil till 400 hrs.?? :confused: Opinions??

Thats exactly what I need to know, Thank you

Correct, but I was told by the dealer that they all come from the factory with UDT NOT SUDT. So why require SUDT when you dont even supply it with it from the factory. Especially if the oil is not to be changed till 400 hours per manual.. So I then also asked if it did have UDT can I mix UDT...

I apologize I may be going at it a little overboard, but I have been having trouble with kubota and the dealer and them not having any of the facts correct on this machine like all fluids and capacities it gets a tad frustrating so I am just trying to make sure its done correctly. As i stated...

Both me and my dad have a B2650 and they are still a tier 3 at this time, which is why we got them!!! I have the 60"deck and he has the 72"deck. He has no problems at all and loves it. I just didn't need the size for the extra cost.. FWIW- We both love the B2650!!!!

Sorry guys wrong forum, thought I was in serv/maint Reposted in correct forum

Evening all, Today I was doing my 50 hr oil and hrdro filter changing and I ran into something strange. 1. in the manual it says you need to drain the oil to replace both filters (hydro-stat & hydraulic). I am doing this on my new B2650. I had a BX2660 and I was told to just replace the filter...