Recent content by Oldmansbike

Check the bearing that The yoke sets in or it could be that yours is just starting to lose its splines. I think the yoke was bad from the factory soft or something like that and of course my warranty ha expired 2 months before it went out. I waited 3 weeks for a new one it was back ordered with...

You don't happen to have a drive over deck do you? Mine started making noises like that so I took it off and discovered that the yoke on the drive shaft didn't have any splines in it any more.

Groomer buck tell them to put a new step thing on but harden it with a torch first. It's been almost a year now and mine hasn't moved at all .

I had the same problem with my 2370 last summer when it was new. The dealer replaced the step thing in the picture above because the original one was wore already. That one lasted about a month and it started doing it again. Dealer came and got it and said the new one was already wore down...

Hodge are you still making the bars? How much for a set for the 2370? Thanks for the advice on adjusting the turnbuckles.

I am fairly new to 3 point hitches and implements. What is the proper way to adjust the turnbuckles with the implement all the way up or at operating height? If I adjust them when the implement is all the way up they are loose when I drop it to operating height and the opposite when I adjust...

Hodge how much is a set for the 2370? Thanks

Thanks for the info will check them out.

Does anyone beside Hodge make the stabilizer bars? Looking for a set for for a BX2370. Thanks

Good evening. How much would you charge for a set of stabilizers for a BX2370 and how long would you need to make them? Thanks Dale

I did some measuring and I won't be able to pick it up very high and it might hit the stabilizer links. So I think I will look for a used one and modify it. Thanks

Local farm store has a 4 foot 1 row cultivator King Kutter brand. Would my 2370 handle that? Most of its use will be in already tilled soil that is sandy. Will use it to keep the weeds in check in garden an strawberry patch. I think it will but wanted other opinions. Thanks.

I had the same problem last week with my BX 2370 couldn't move the pto lever out of the rear position. I tried the same things you did and it wouldn't move. I increased the Rpm of the engine just a little off idle and it popped right out.

Thanks for the replies. I have already tilled it up like you said Skeets a little bit each pass. I was just wondering about tilling the weeds between the rows in the summer time. You wouldn't have to go as deep.

I think I already know the answer to this question but I wanted to check and make sure I'm right. I have a BX2370 with drive over deck. I bought a tiller a couple of weeks ago. Do I have to take the mower deck off to use the tiller? I think that if I lock the deck up and put the pto lever in the...