North Idaho Wolfman's latest activity
-
North Idaho Wolfman replied to the thread L4600 Help! Hydraulics.What Variant of L4600? F DT HST What size / color of metal? -
North Idaho Wolfman replied to the thread Lots of black smoke (hard to start).Yes helical gears can be tricky to get lined up.
-
North Idaho Wolfman reacted to Nauty's post in the thread Lots of black smoke (hard to start) with
Like.
You were correct Wolfman. I reluctantly took the timing cover off and the crankshaft gear was a tooth out. I know what i did .. When I... -
North Idaho Wolfman replied to the thread D902 3-Cyl PFR-KD Zexel Injection Pump Troubleshooting.Sorry you got your feeling hurt. And I'll 100% guarantee you it's not running Perfectly, but I guess it's perfect enough for a...
-
North Idaho Wolfman replied to the thread L2800 HST PTO Troubles.Replace the pressure plate, the clutch disk, the throwout bearing and the pilot bearing / bushing while your in there.
-
North Idaho Wolfman replied to the thread B7100 lift wont stay up.I use a suction cup to remove them, most are aluminum pistons.
-
North Idaho Wolfman replied to the thread Hydraulic Fitting questions.Those are the detents (red x's) not the pressure relief valves. DO NOT remove them. The disconnects (green) is where you would connect a...
-
-
North Idaho Wolfman replied to the thread B7100HST engine swap with b6200E.The front axle frame does not cross over, neither do any of the other supporting / attached parts.
-
North Idaho Wolfman reacted to roofarm's post in the thread L3650 Loader Trouble When Lowering with Haha.
The issue is resolved! and now i know what it sounds like when my rear hydraulics are dead ending. I made the adjustment. Also the Roo...
-
North Idaho Wolfman replied to the thread B7100HST engine swap with b6200E.I could be, Kubota has been known for doing things like that on the older models.
-
North Idaho Wolfman replied to the thread B7100 lift wont stay up.Seal ring on the three point piston is shot or the cylinder walls are scored. Open it up and find out.
-
-
North Idaho Wolfman replied to the thread B7100HST engine swap with b6200E.I don't think the b7100 front axle will even mount to a B6200E frame. Might be much easier to cut the b7100 front frame apart and add...
-
North Idaho Wolfman replied to the thread L4060 Cab model AC issue.@BBFarmer nailed it. You need some gauges to figure out what is really going on with it.
-
North Idaho Wolfman replied to the thread D902 3-Cyl PFR-KD Zexel Injection Pump Troubleshooting.The chamfered tapered plates are to set spring pressure, not timing. Fuel in the oil will not be fixed with any "kit", you have a worn...
-
North Idaho Wolfman replied to the thread D902 3-Cyl PFR-KD Zexel Injection Pump Troubleshooting.What insults? Oregon Fuel injection is not going to " walk you threw troubleshooting it" You have messed up and got in over your head...
