Recent content by nevertoolate

Vic, I recently purchasedthe ROPS for my 1980 B7100-D. Installation was straight forward until we got to the seat belt. The instructions say attach the belt as shown in a picture on the sheet, unfortunately the picture quality is not good enough to see what they intend. I e-mailed Kubota HQ for...

I could have been clearer, 29.8 V at max RPM output increases with RPM.

I've taken all the electrical connections apart and cleaned them hoping that would resolve the problem. It did not. Thanks for the confirmation.

I'm in the final stages of rehabbing a B7100D and need to resolve an issue with the charging system. At the battery terminals I read the battery voltage only regardless of engine speed. I have 29.8 V AC coming to the regulator which I understand from reading other posts indicates the dynamo is...

Thanks for the guidance. Dropped by TSC picked up a 60 ml syringe attached a short length of flexible vinyl tubing so I could move it around the bottom of the reservoir and used that for suction. Added some diesel, reached inside with a long screwdriver to loosen and stir things up and continued...

Picked up a '80 B7100 recently that had been idle for a number of years. After getting all the rusted stuff freed up and fluids replaced on the tractor I tackled the loader. When I removed the screen filter I noticed sludge inside the reservoir up to the level of the filter, so maybe an inch...

Do you have the B1700 book? Thanks