Recent content by Nautique1228

Thanks for the links

I have a 2008 toro z master with a d902. Im having problems with misfiring and sometimes overrunning. Intermittently of course. I have it at my local dealer to diagnose. They have said the injection pump isn't sending fuel to cyl 1 and its $1200+. Does any have a shop that rebuilds these or am I...

Figured it out, if you have the fueling adjustment screw to far in it won't let the arm come out at all to rev up the motor. So start with it way out and adjust it in til it stops smoking at high rpms. So I was correct when I first installed it. The pin goes behind the picture above not in it.

It's just a "hook" I use a 90* pick. It's is used to grab the spring and bring it forward to hook to a bracket. Here's what it says word for word. 1. Move the fork lever (2) to the gear case side. 2. Hookthestartspring(6)totheinjectionpumpcontrolrackpin(5). 3. Put the specific tool (7)...

Studs are out still no luck

Hi all, I have a 2008 toro z master with a 902d. I bought it with a spun rod bearing and rebuilt the motor. I bled the fuel and started right up and idled nicely. When I went to rev it up, I had no throttle, it just idled. So I assumed I hooked a spring up wrong or had an issue with the...