Motion's latest activity
-
MMotion replied to the thread L275 Injector seat reamer size..Are you sure all of the old washers have been removed.
-
MThe picture from Messicks sure looks like it comes as part of the handle assembly. It is likely either cast into the plastic or...
-
MMotion replied to the thread Anybody ever sharpened a piranha tooth bar?.Consider a die grinder with a carbide double cut burr bit.
-
MWell this is a little wonky how I share them (i am struggling to get these old pics off my PC) , but here are a few pics. I ‘borrowed’...
-
MMotion replied to the thread Greasing help..After cleaning the zerk and prior to reinstalling, fill the opening with a good penetrant, pump the fitting and get as much pressure as...
-
MWhat about the radiator cap? It should've released the excessive pressure before the rad blew.
-
MThanks for the reply . Reading a bit on it, I'm assuming it stays tacky which would attract dirt dust, clippings etc. 🤔 yes or am I...
-
MMotion replied to the thread Recommendations on a brand and model of grease gun.My equipment has many recessed grease fittings prior to greasing; I need to clean the recessed area (rag and small tipped screwdriver)...
-
MMotion reacted to Trash Panda's post in the thread Recommendations on a brand and model of grease gun with
Like.
I love mine, and I added a lock n lube coupler as well. It’s made greasing equipment a breeze. -
MMotion replied to the thread Dibble bar,,,, Kubota orange?.Weather using bare root or plugs, be careful not to plant too deep err to the high side, to ensure establishing good crown roots. I...
-
MWanted something more compact for my fuel transfer tank so I came up with this. I still have to install some cleats and eye bolts to...
-
MThe first spring attachment arrived today from Mechmaxx. Wow Mechmaxx, ordered the SG24 Stump Grinder this past friday and it was...
-
MGot a friendly reminder this a.m. from the dealership saying spring is a very busy time for them and they would prefer not to see people...
-
MMotion replied to the thread Advice on Tractor Shed/Garage Design.Do as you feel is best, starting a project like this because you have an existing slab might not be the best approach. I'd suggest...