Recent content by Marengo

Is Everything Attachments open again? I just got an email from EA Nate that looks legit. Just curious, not that I'd jump in to order something. Almost got burnt except for PayPal.

I also used PayPal for my purchase with EA. You have 180 days to contest for non delivery. It only took about 14 days and PayPal refunded my purchase price after I opened the complaint. Get it started asap.

When I bought my '88 B6200 HST 4WD new from the dealer it was factory turf tires all around. Turf tires didn't really fit how I was using the tractor. My local rural tire guy suggested running Titan Tru Power 29x12.5-15 for the rears and Firestone Turf & Field 21x8-10 on the front all on the...

PayPal just sent my money back! :giggle: Only took 9 days from when I filed for non delivery.

Just pulled this up, I'm not a lawyer so I don't claim to understand everything here but it looks like you're not getting the product you've paid for unless you can claw your payment back. Please correct me if I'm wrong. I'm still waiting on resolution of my claim with PayPal.

I too used PayPal. Filed a dispute 03/04/24. I should have results by 03/24 per PayPal. I'll continue to call and email EA daily until the resolution, just to CYA (cover my actions) with PayPal.

I'm glade I stumbled on this post. I had ordered a disc harrow back in October and asked them to hold off deliver till this March. I was having it delivered to work and didn't know how winter weather was going to be as I'd have to run the tractor to work to pick it up. Does anyone have...

Thanks Wolfman, With over 3000 hrs on this tractor one or all of those items may need replaced. Looks like I've got some digging around to do. The WSM will be a huge help.

My old (1988) B6200 HST has been creeping for a while both forward and backwards, depending on the direction I was traveling when I released the pedal. I've finally decided I need to resolve this issue. The pedal is well lubed as is the whole tractor, like the old blues song says...it's cheaper...

Sean, I did not have to drain the hydraulic fluid when I replaced the lift piston seals. The replacement of the seals was not messy at all. In replacing the lift arm shaft you may have more fluid lost but I don't know for sure. There may not be fluid up in the shaft area unless the tractor...

CJN8 Thanks for the help. Steering and 3PH are both working again. Still waiting on the rain to stop long enough to get caught up on the mowing. Might have 3 dry days coming up before the 4th. Jim

3ph lift piston seals, It's the Saturday morning, CarTalk is about to come on, and I have time to finish working on the tractor. I picked up the new 3ph lift piston seals mid week. I removed the seat and seat mounting bracket. Cleaned the area around the lift piston cylinder cap. Tried to...

OK, went to work Monday thinking about how to solve the pitman arm problem. The answer was simple. Use the drag link against the pitman arm to get it off. Swing the drag link over the front tire. Move the pitman arm so it parallel and over top of the drag link. 3 easy whacks with a framing...

Here's what I've learned. Pulling out the steering box was a piece of cake. Pop off the steering wheel, unbolt the dash, document and disconnect a couple wire connections and tach cable, remove fuel line from fuel filter and drain and remove fuel tank. 4 bolts and you have the steering box off...

My theory of auto maintenance times don't apply to the Kubota. If it takes 20 minutes to change the oil on the truck it will really take an hour. The Kubota is more like 5 or 6 times longer than you think it should take. I did replace the Spring Washers on the Control Lever Arm. It wasn't as...