Recent content by Love my BX24

Hello Hkb82. I'd like to thank you for your response to Northwoods regarding his negative comments. I should've known you were a Canadian, even better in Ontario, since that's where I am too. I found his, and a few others', pretty discouraging. I'll be posting an update with more info...

It strains to turn over but doesn't fire. First there's' a clicking sound, then it strains to start, but doesn't.

I first get a clicking noise and then the sound of the engine trying to start/turn over. It just doesn't 'catch'. Wondering if it could be the started. I saw several YouTube videos showing the starter not having enough power.

While using my snow blower, the tractor stalled twice then wouldn't restart. I discovered that there it was out to oil. A neighbour towed it back up the drive and into the garage. I refilled the oil, plugged in the block heater, then left it overnight. Now I can't get the engine to turn...

Thank you.

I have an older snowblower with a S.NO.21404610.. I'm not sure where the reduction gearbox is since my BX2750D doesn't look like the ones on recent videos. Any suggestions?

BX 24 won't start after oil change

The rad was totally full.

Totally dead. No response when I turn the key. It probably overheated because the grill (under the steering wheel) got covered is long, dead grass. I have no way of diagnosing on my own and the nearest dealer is 40 minute drive away.

My BX24 overheated while using the MMM to the point that the reservoir was boiling! Next day the tractor was totally dead. The coolant reservoir was empty, so refilled with distilled water and some coolant. I also plugged in the battery 30 minutes. Still nothing. Have I 'killed' my tractor...

I have a BX24 (2017?) that I bought used with turf tires. I bought a set of used AG tires advertised as for a BX24. The rear ones were changed without problems but the rims on the front don't fit. When did they change?

Thanks. I watched this and it's very helpful. I need to take off the front guard before installing the hitch. Just another step to do while the snow is piling up outside! ;>)

I bought a used BX2750 snowblower with the quick hitch already attached. Can I install these together on to a BX24 or do I have to take them apart and install separately? Also, is there some kind of hopper that I can put on the back to spread de-icer or sand? Thanks