Recent content by Laurel Knoll

Looking for the right and left “arms” as seen in the attached image: I have the subframe on the tractor already, just need the backhoe half hardware. Bolts and the special wedge pins that secure the backhoe half mounts to the subframe would also be great to get. I’m located in Western...

Thanks, email sent.

ThanksI will give them a buzz on Monday. Who knows, maybe they have some in stock. Can’t hurt to call. Interesting. From their chart, it looks like they only go up to 65 hp, which probably means the pins are Cat 1. If it weren't for the fact that my backhoe subframe prevents me from narrowing...

Thanks. I will give them a buzz on Monday. Who knows, maybe they have some in stock. Can’t hurt to call.

Looking for a Cat 2 grading rake to go on my 2018 M7060. I've looked at the York RI and ETA extreme, but I really like the fact that you can angle the Land Pride out to scrape beyond the rear wheel. If anyone has one for sale, feel free to give me a shout. Thanks, John

I'm looking for a backhoe to put on my 2018 M7060 ROPS. The machine already has the correct subframe, as the previous owner had an M4011 on it that he kept. Will need the quick attach arms on the backhoe side. Bonus points if the backhoe has a hydraulic thumb. I know this is a long-shot, but I...

I'm looking to get a landscaping (aka York) rake for my M7060. Most everything I've run into used is Cat 1, and I need Cat 2, not just for the pin size, but also for the width of the lift arms. (My machine has a subframe for a backhoe, so I can't adjust the arms in without hitting against the...

Made good progress on the grapple and box blade. I ended up going with the 74" grapple from Wildkat (aka Mid State Attachments) http://www.msattachments.com/-2-extreme-root-rake.html They had good reviews online and the piece seems pretty rugged. I gave it a good workout this weekend and am...

Thanks again for your input. Here are some additional photos. The place where the U pipe would go does have lines coming out. Here are some additional images of the tractor from the side and back: I was rushing a bit on my way to work this morning, so I need to take some time to...

Thanks all for your feedback. The machine has an LA1154 loader on it. I'll use this info to take look underneath to compare what's down there with what's in the info you all provided. Regarding the point about there being a third line running to the back, that would probably account for the...

I have a query out to the dealer where I bought this and will be interested to get their input. I'm not certain if that label applies to the backhoe circuit or if it is referring to the loader circuit. If the latter, the machine has a loader, so that circuit is working. I'll post when I hear...

Hi, I recently got a 2018 M7060HD12 ROPS, and I have a question about the hydraulic line for the backhoe. The previous owner kept the backhoe and I'm wondering if the machine is actually running without the pump circuit being properly set up. As I've been familiarizing myself with the machine...

Thanks for that feedback.

Making progress. Tractor arrived a couple weeks ago. I tracked down a used Gannon box blade with hydraulic rippers and that should be coming soon. I'm following up on the suggestion for top and tilt cylinders and am planning on trying to order those after the box blade arrives. The grapple is...

Hoping to get a used or surplus unit, but Messick's is on my list if I can't locate one. Thanks for the tip on Lown. I am also thinking about that type of added protection once I get the stock brush guard. John