Recent content by KZ15

I put a bale spike on yesterday and tried to lift the back end of a flat bed trailer. Wouldn't lift it at all. I guess I will order a hydraulic pump today. :( Is there anything else that I will have to replace when I replace the pump? I don't want to screw this up.

Tested the pressure before the loader spool valve. 2 hoses go to the loader spool. 1 in and one out. Tested both of those. Those two hoses do come from the side of the transmission, right after the valve that you pictured in your response. I will check that valve and still try to get a...

Ok, did the pressure test. Only 1,000 PSI. So I'm assuming it's the pump. Is there anything else to check first? I haven't attached anything to the 3 Point lift arms. I was thinking about putting a bale spike on and lifting a big bale of hay. Is there any adjustment on the hydraulic pump...

The three point seems to work fine, the arms go up and down. I haven't attached anything to them yet. I've only had this tractor a couple weeks. I will attach something to it and see if they will lift a load. I'm also tracking down a tester so I can check my hydraulic pressure........before...

I have run it for quite awhile. It was slow and weak before the fluid change. Thought that might fix my issues, but it didn't. It took awhile to get the air lock out. I don't want to get a new pump, but I think I"m going have to.

No, I haven't done a pressure test. I don't have a tester. Changed the fluid and filter. Power steering and shuttle shift seem to work fine. Loader is super slow and will only operate at high RPM's.

I think I need a new hydraulic pump for my L3750DT. Does anybody know what or where the part number is? Also, if it's re-buildable?? Thanks, Kevin

Thanks for the help. Bulldog that looks exactly like what I need to do!!

Has anyone added on Hydraulics? I just got an old L3750DT. It just has two hydraulic hoses going to the FEL. I was looking for some advice on how difficult it is to add a set out the back so I can disk with this tractor.