Recent content by Kubotank

a used 2782b snowblower should be fairly easy to find at a reasonable price.

The 3pt rear blower may not work in front, you will need a reduction box because the mid PTO run at 2500rpm compare to 540rpm in the back.

If you don't need your mid PTO for a mower or something else the subframe can stay on all the time. I remove it during summer because I have a mid mount mower. It's really easy to remove and install and even if I wouldn't use the mid PTO, I would still remove it in summer because it lower the...

I meant the snowblower, it can be removed to install the bucket within minutes

R&R within minutes

Thanks

Yes, that was the main purpose of the mod and also to be able to blow off snow drift of almost 4' high, which is impossible with the OEM setup without having the snow going over the blower, the OEM lifting height is only 6'' and almost useless at that height because it's leaning backward so bad.

It can be seen in action and the fabrication by doing a search for Kubota Compact b2650 loader mount B2782 snowblower and Kubota, Compact, B2650, loader mount snowblower part 2 on Google

I use stopper chains to stop the lift at 20''

Drive shaft driven like OEM

I built a custom subframe and raised the mid shaft closer to the front axle, it give more clearance when I use the bucket and also raise the fix shaft so it's not visible from the side anymore:) Raised fix shaft Custom subframe installed Custom Frame

I'm running it on mid PTO as the OEM

Hi all, This is my loader mounted snowblower that I built 3 years ago and still run strong