JSum's latest activity
-
JJSum replied to the thread Used grass catcher for sale price drop, $600. GCK60-26BX.Still Available?
-
JJSum replied to the thread BX23S material collection system.That looks rather similar to how my BH attaches except I have two posts in the area where it shows a sleeve being inserted as on your...
-
-
JDoes anyone know if I can take a GCK 60–23BX grass catcher unit and mount it on my 2021 Kabota BX 23S - 3 point hitch, or use the...
-
JThis was my list for my 50hr service: HH150-32430 OIL FILTER HHK20-26990 HYDRAULIC FILTER K1211-82320 AIR FILTER 12581-43012 X 2 FUEL...
-
JUnless I'm seeing it wrong my manual shows just a filter change at 50 hours on hydraulics. Is this right? Dealer said at one time he...
-
JWell - 1st I would buy some 5w-40 Rotella T6 oil for the engine - 3.5 qts I would get a Kubota oil filter - HH150-32430 2nd - I would...
-
JConclusion I ended up with the following (Amazon Canada): SCITOO 5x4.5 82.5 1.25" Wheel Spacers These spacers fit like a glove; They...
-
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.It's fixed! Maybe I made a rookie mistake.... I went back and looked at the owners manual and the WSM and I don't see anywhere a picture...
-
-
JJSum reacted to Dustball's post in the thread 23S starter burned up, found the wire to the solenoid is always hot with
Like.
Here's the wiring diagram pertaining to the starter on the BX23S. It's very straightforward so there isn't too much to check. Battery >... -
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.The socket where the starter relay would plug in? How could I test that?
-
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.Yes sir, I did that too. Still Hot! I thought for sure removing the relay would kill it!
-
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.Good idea. If money wasn't an issue, I would have a brand new machine not a used one! I wanted to see if I was missing anything obvious...
-
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.I haven't installed the new starter yet because the i discovered the wire to the starter solenoid is hot at all times. I'm trying to...
-
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.UPDATE #2 I removed the starter relay completely and tested the wire that attaches to the starter solenoid and it STILL has power...
-
JJSum replied to the thread 23S starter burned up, found the wire to the solenoid is always hot.I had the same thought. Just got back from the dealer and put a new ignition switch in. Same problem...... The wire going to the paddle...
