Recent content by josephjhaney

Well, I do still have the original carb so I can put that back on once I clean it. Joe

Thanks, this really helps, I'll report my results after I give it a go. Joe

This is the diagram, it just doesn't show very clearly what spring should go where.

Hello all, I had some issues with an aftermarket carb that I put on, combined with dirt in the fuel tank, so I figured hey, why not replace the line, filter, pump, and get it all good as new! I took upon myself to do just that, and now after putting it all back together, the good news is she...

I'm looking for a bagger for the T1760 tractor, I'm not having any luck finding a model number for that. Anyone have a bagger for this model? Thanks in advance! Joe

Figured it out, I connected to the proper places and it started right up, just going to cheat and add a push button for the starter. Joe

No corrosion on cables, the starts spins very fast when the passthrough is used. The small wire that connects to the solenoid, I took off and put back on, checking to see that it was clean and seated well. The other two wires (The large ones) were well seated, no visible corrosion. I did not...

I have a bypass set, when I turn the key at the moment, with a new battery, the lights go dim, but that's all that happens. I hooked up a bypass to test the starter, and the starter just whirrs, doesn't engage. I do have a new starter ready to install, but want to make sure I'm not missing...

Yeah, just blew another fuse, after replacing the battery with a standard, I think the solenoid went, it had been intermittently starting and sometimes clicking, now it's not clicking, just the lights on the dash dim when I turn the key to start. New Starter on the way. Well, at least I'm...

Well, just blew a 15a fuse with it running for about 5 min, so a leas acid battery it is. Live and learn, next to get under and see why the mower isn't spinning. Joe

I was not aware of those potential issues with the LiON battery, I did drop it in and the thing starts every time now, I did have to remove that linkage plate, and I put a new el cheapo carb in and have the original on the bench, she fired right up and tuns well now, seems to be nearly full wide...

I'm down with trying that, do you have a link to how to go about doing that? Joe

So I have a new to me T1760 with the Kawi water cooled motor, and I know it needs the carb cleaned, but the guy who sold it to me fired it up on starting fluid to show me it does run. My current issue is if I charge the battery fully (only 230 CCA's) it will turn over, and it turns over fast...