Recent content by jaykremm

Hi All, So I'm looking at options for a pre-emissions 30hp B-Series tractor. The standard bearer seems to be a B7800, but I'm trying to figure out what changes were made between it and other comparable models around the same time. The others I see are; B2910, B2920, B3000, B3030, B3200 and...

The temperature gauge on my L2650 had been slowly creeping up above hot , even when mowing under low load. Checked the engine, and temps were only around 175F. Changed the sending unit and is didn't help (maybe a little bit). Just checked the gauge resistance as per the WSM (thanks Wolfman)...

Thanks Wolfman, It is the rims that rub, if you look closely at the front rim in that second picture you can see the silver ring that the tie rod ground into the rim (before I realized what was going on). The tractor would move in reverse, but as soon as I went forward it would rock forward and...

I just purchased an L2650 where the previous owner had the hilly property, so he had spacers in the rear axles and the front rims were turned "cup out" to widen the wheel track. The tractor also has turf tires, with the original 355/80d20's on the rear and the put 235/75R15's in the front...