JasonW's latest activity
-
JJasonW replied to the thread I own a 2021 L2501..Gear drive or HST? Blue smoke is oil burning. Sure it’s not black smoke? Which would be over fueling. If it’s black smoke you are...
-
JJasonW replied to the thread Need Advice (Desperately).Regarding the parking lock you gain with the 12 speed you lose the brake pedal lock that is on the 8 speed models. Notice how it says...
-
JJasonW replied to the thread Need Advice (Desperately).Call the insurance and find out what they say. If it runs and has hydraulics, lift the front end up with the forks to act as a skid...
-
JJasonW replied to the thread Switching Tire Types - L2501.Two things stick out in your post is you’re worried about marking up a stone driveway and yard, then you are considering a larger...
-
JJasonW replied to the thread Can't find a good fuel shutoff solenoid for L3400 that actually works..So you made a post about an issue, had people reply to help troubleshoot, but just skim over the questions and say you just bought more...
-
JJasonW replied to the thread L5240 PTO RPM display and indicator not working, but the PTO works fine.Download the WSM for your model. Good to have for all reasons. Could be similar, when I bought my M it was the same. PTO worked, just...
-
JJasonW replied to the thread Hydraulic Top Link Kit.On my open station(cab model would be similar)M series the valve is located right above the top link mount. So I just grab the lever...
-
JJasonW replied to the thread M7060 Air in water separator.Do you know if your machine is covered under the injector TSB? Have you changed the spin on fuel filter? On my M there are air/bubbles...
-
JJasonW replied to the thread M7060 Air in water separator.What machine are we talking about? Are you having any issues with it running?
-
JJasonW replied to the thread #1 missed maintenance item.All my local stations have a sticker by the diesel pumps that state Up to 20% biodiesel. So it could be 0% or up to 20% at any given...
-
JJasonW replied to the thread Box Blade issue on L3901.They should have a lock/jam nut to tighten to prevent the turn buckle from moving. Are you not securing the lock nut?
-
JJasonW replied to the thread Box Blade issue on L3901.Pictures would help. The turn buckles are not supposed to be “tight” should be set to allow the implement to move 1” or so side to side...
-
JJasonW replied to the thread B7800 fan belt discontinued..Edit. It’s in the title. You can remove it be loosing the alternator and moving it around the fan. Even if it breaks removing it an auto...
-
JJasonW replied to the thread L3901 Advice.Define attractive price, Hours? Gear or HST? Agree with the camera angle. But definite scratch/dent on the hood. Tires are abnormally...
-
JJasonW replied to the thread PTO drive for a Miller Bobcat welder?.Just looked at a pulley calculator. 540PTO 18” with a 3” motor side is 3240RPM...