JasonW's latest activity
-
JJasonW replied to the thread PTO drive for a Miller Bobcat welder?.Most are 3600 rpm or 60hz. Be aware if you get it set up with belts at the correct RPM/HZ and the genset is under load it may slip...
-
JJasonW replied to the thread L2800 Air filter bracket.It’s all good. I was making sure I wasn’t looking at the wrong diagram, I even compared the F,DT and HST versions. The air filter lid...
-
JJasonW replied to the thread L2800 Air filter bracket.What is yours missing? Not sure about the other poster that listed a part number and the diagram doesn’t match a L2800. The radiator...
-
JJasonW replied to the thread L2800 Air filter bracket.What model tractor is this from?
-
JJasonW replied to the thread L2800 Air filter bracket.Parts diagrams show it’s bolted to the radiator support structure on the bottom side of the air cleaner assembly.
-
JJasonW replied to the thread Rotation Rear wheels.When I widened the track width on my L3800, which required the right side to go on the left and left to go on the right, It was easier...
-
JJasonW replied to the thread New to me strange l2550 no pto switch....This is from a L2550 operators manual I found online for free.
-
-
JJasonW reacted to North Idaho Wolfman's post in the thread New to me strange l2550 no pto switch... with
Like.
Not Quite, The PTO on that model is a 2 speed PTO, the blue knob is a lockout to keep it from shifting into 1000 RPM without overriding it. -
JJasonW replied to the thread New to me strange l2550 no pto switch....PTO is the lever with the black knob in the middle. The blue knob is a lockout to prevent the PTO from accidentally shifting.
