Recent content by jakemaxwell806

Feed cattle daily with it since it was new Sent from my SAMSUNG-SM-G890A using Tapatalk

Do a hydraulic pressure test an see where your psi numbers are at Sent from my SAMSUNG-SM-G890A using Tapatalk

I have a m4030 with 8500 hours no grease zerks I'm going to have to rebuild it when weather warms up an bit using it daily Sent from my SAMSUNG-SM-G890A using Tapatalk

Yes I agree let them fix it [emoji817][emoji817][emoji817] their problem that's what's warranty is for Sent from my SAMSUNG-SM-G890A using Tapatalk

Good advice [emoji106] Sent from my SAMSUNG-SM-G890A using Tapatalk

Colder temps takes longer glow plug heating time if it's set to cycle automatically cycle the plugs more to make it start good an fast Sent from my SAMSUNG-SM-G890A using Tapatalk

Watch for bubbles in your radiator I run mine a long time with the cap loose before I pulled the head the head gasket had a small leak letting compression in to the coolant system Sent from my SAMSUNG-SM-G890A using Tapatalk

Try a Kubota dealer an hope for a nice parts man to cross reference for you Sent from my SAMSUNG-SM-G890A using Tapatalk

It could be a problem with the injector on that cylinder Sent from my SAMSUNG-SM-G890A using Tapatalk

If it has a whistle that is for over heating notice (steam whistle ) Sent from my SAMSUNG-SM-G890A using Tapatalk

Key switch getting wore on my b8200 If I turn all the way to the left no glow plugs I turn only a little an glow plugs work Sent from my SAMSUNG-SM-G890A using Tapatalk

Good explanation Thanks Sent from my SAMSUNG-SM-G890A using Tapatalk

Hope its a simple fix an the dealer does you right that's an expensive radiator cleaning an problem not fixed poor mechanic it appears Sent from my SAMSUNG-SM-G890A using Tapatalk

Its what I call a lieing guage I have seen it different times even on one new tractor old school is ease radiator cap let pressure off if a lot of pressure wait to remove you don't want burnt after cap is removed use a candy thermometer to check temperature better way is use a thermo detector...

Good starters to I bought one an now have 2 keep extra rebuilt when its needed Sent from my SAMSUNG-SM-G890A using Tapatalk