Recent content by Holtondale90

I feel like my only fix for this is gonna be a trip to a dealer. I hate to say it but it seems like it's gonna be beyond my ability

Is this within the position control valve? my apologies that I do not know how to read that diagram. In the manual that is showing the poppet within the position control valve. That would suck being I bought a complete new position control valve and have the same issue as the old one.

No sir. No draft control on this one.

I apologize if I am coming off in any way. That was not my intentions at all. I am just doing my best to explain everything I have done thus far. My apologies.

It was a brand new valve supposedly the "new" style. As for the check valve the old one that came off looked fine from what I could see. No trash. Oring and Teflon backing ring were okay from what I saw. I replaced #40 in the diagram I attached. This was the last thing I have done/ replaced.

Numbers 100, 80, 130 and 050 are what I replaced on both cylinders.

Everything I replaced on the tractor was kubota parts that I ordered through my local dealer. I did re build both of the 3 Point cylinders but all I replaced was the piston bushing and gasket and then the scraper for the rod. This is what the dealer said would be in a seal kit if I were to buy...

This whole system can be finicky. Also another note here I forgot. This tractor was given to me by my brother in law. He went out and bought a new one since this one was having these issues. My dad used it for a while and put way to big 9f a box blade on it and the 3 point hitch would not rise...

No noise of any kind actually. Only time I heard bypassing was when I was adjusting the feed back rod to the point where it opened the valve. Then as the manual says I back it off a few turns worked it up and down still bounces. No also to note, I can get this to bounce by just using my body...

I messed with that the other day. It either got worse or stayed the same unfortunately.

The only valve referred to as a control valve is the Position Control valve that mounts to the bottom of the hydraulic block. That is brand new. It was the first thing I replaced.

I guess I need to figure out which valve you are both referring to then I've looked at both manuals and haven't seen a valve called that in their diagrams

Hopefully I can get some assistance here. I have a fairly old Kubota L3130E 2wd roughly 20 years old. The 3 point hitch has started to hunt (or bounce if you wanna say) when it is picked up with weight on it. I can close the lowering speed adjustment and it quits and it won't bleed down, if I...